JVC BR-DV3000E instruction manual Rear panel

Page 9

NAMES AND FUNCTIONS

– Rear panel –

OF VARIOUS PARTS

!

6

5

DV IN/OUT

 

 

 

 

AUDIO

 

LINE

VIDEO

Y/C

CH 1/3

CH 2/4

 

IN

DV IN/OUT

 

AUDIO

CH 2/4

CH 1/3

9

LINE

VIDEO

Y/C

 

 

 

IN

REMOTE

OUT

9PIN 4

DC12V

 

NTSC/PAL

SERIAL

NTSC PAL

32

1

0

OUT

87

 

REMOTE

DC12V

 

 

 

 

NTSC/PAL

9PIN

SERIAL

NTSC PAL

1

DC power input terminal (2P)

 

 

This is used for DC12V input. It connects the

 

DC power cord of the provided AC adapter.

 

Memo

●When power is supplied to this terminal, the OPERATE indicator located at the front panel lights up. (The LED lights up red when the OPERATE indicator is OFF.)

●Setting this unit to OPERATE ON, OPER- ATE OFF or PLAY mode when the power is supplied to this terminal can be done by mak- ing the appropriate selections from the DC IN MODE item in the SYSTEM menu.

2

[NTSC/PAL] NTSC/PAL signal se-

 

lection switch

 

Use this switch to select NTSC or PAL as the

 

signal system. Use it to make a selection when

 

composite video signals or YC separate video

 

signals are input.

 

NTSC

: Use this setting for NTSC signal input.

 

 

The NTSC indicator on the front panel

 

 

lights up.

 

PAL

: Use this setting for PAL signal input.

 

 

The PAL indicator on the front panel

 

 

lights up.

3

[SERIAL REMOTE] serial remote

 

terminal (mini jack)

 

Connect this terminal to the serial remote con-

 

troller RM-G30, which is available separately.

 

To control this unit via this terminal, please set

 

it up as follows.

 

● Set the REMOTE item of the REMOTE

 

menu to ON.

 

● Set the [REMOTE SEL.] switch on the front

 

panel to “SERIAL”.

Memo To use this terminal as the FOOT switch input terminal, please set the FOOTSW item of the REMOTE (2/2) menu. ☞ Page 60

4

[9 PIN REMOTE] 9-pin remote ter-

 

minal (D-SUB)

 

Use this terminal to connect to the RS-422A-

 

compatible editing remote controller (RM-G820).

 

Please use this unit as a player. To control this

 

unit with this terminal, please set it up as fol-

 

lows:

 

● Set the REMOTE item of the REMOTE

 

menu to ON.

 

● Set the [REMOTE SEL.] switch on the front

 

panel to “9 PIN”.

5

[VIDEO Y/C IN] Video Y/C input

terminal (4P)

 

 

This is the input terminal for YC separate video signals.

 

● To input video signals from this terminal,

 

set the [INPUT SEL.] switch on the front

 

panel to “Y/C”.

 

● When Wide discriminating signals are in-

 

put, ID signals for Wide discriminating sig-

6

nals are recorded.

[VIDEO LINE IN] Video line input

 

terminal (RCA)

 

This is the input terminal for composite video

 

signals.

 

● To input video signals from this terminal,

 

set the [INPUT SEL.] switch on the front

7

panel to “LINE”.

[VIDEO Y/C OUT] Video Y/C output

 

terminal (4P)

 

This is the output terminal for YC separate video

8

signals.

[VIDEO LINE OUT] Video line out-

 

put terminal (RCA)

 

This is the output terminal for composite video signals.

 

When tapes recorded with Wide discriminating

 

signals are played, ID signals for discriminating

 

signals are output.

 

Memo

9

[AUDIO IN] Audio input terminal

 

(RCA2)

 

This is the audio signal (analogue) input termi-

 

nal.

 

For audio dubbing, sounds from the CH1/3 ter-

 

minal are recorded on the CH3 channel while

 

those from the CH2/4 channel are recorded on

 

the CH4 channel.

 

Memo

When the MIC terminal on the front panel is connected

to a microphone, sounds from this terminal will not

be recorded.

0

[AUDIO OUT] Audio output terminal

 

(RCA2)

 

This is the audio signal (analogue) output ter-

 

minal.

 

Memo

●The audio channel to play back tapes recorded in the 32k mode can be selected with the OUT SE- LECT button on the wireless remote controller or by setting the AUDIO OUT SEL. item of the AU- DIO/VIDEO menu.

●The output level of the playback audio can be se- lected with the OUT LEVEL button of the wireless remote controller or by setting the AUDIO OUT LEVEL item of the AUDIO/VIDEO menu (NORMAL

or ATT).

Memo

●For playback or DV signal input, signals are determined automatically and not affected by the status of this switch.

●Please turn the unit to OPERATE OFF be- fore using this switch. If switching is performed when the VTR is in the OPERATE ON mode, the VTR will automatically go into the OFF mode before engaging the ON mode.

●It cannot be used for NTSC/PAL conversion.

●Besides video signals, the following signals from the [VIDEO Y/C OUT] terminal and [VIDEO LINE OUT] terminal are displayed on-screen.

•Menu screen signals

•Character display of date, time or operation modes (Status screen)

By pressing the DISPLAY button on the wireless remote controller or by setting the DISPLAY item in the DISPLAY menu, the user can choose to turn the status display on/off.

●The SETUP item of the AUDIO/VIDEO menu can be set to determine whether setup will be added to the signals of [VIDEO Y/C OUT] terminal and [VIDEO LINE OUT] terminal. (NTSC only).

! [DV IN/OUT] DV input/output termi- nal

This is the input/output terminal for digital sig- nals of IEEE1394 standard. It is connected to video devices with DV terminals.

●To input signals from this terminal, please set the [INPUT SEL.] switch on the front panel to “DV”.

●Signals from this terminal are output regard-

less of the INPUT SEL. switch setting.

14

15

Page 8 Page 10
Image 9
Page 8 Page 10
Contents BR-DV3000U For service purpose with modified contentsLength Port CableFor Your Safety Australia LA PluieImportant In the United Kingdom Table of Contents Daily maintenance and regular inspection PrecautionsPrecautions on the use of tape Introduction Precautions on the use of cleaning tapeCassette tape CondensationFront panel REC Record button/LED FF Fast forward button/LED Indicator Audio indicatorPlay Play button/LED @ Stop Stop button/LEDRear panel ADV button Still Mode buttonREV button Operate button fMemo  Display at position B Display for about 3 seconds  Display at position a Operation in progressFor details, please Refer to Operable scope of the wireless remote controller Precautions on the use of batteryLoad in 2 batteries Close the cover Model onlyTurning off the power PowerConnecting to the AC adapter Switching on the powerSelecting the NTSC/PAL signal system Operation Lock mode To set the unit to the Operation Lock mode  To turn off the Operation Lock modeEjecting the cassette Setting the date and timePlay the Display 1/2 menu Enabling on-screen displayTo engage the Display 2/2 menu Set the Date Style and Time Style itemsRecording Connection and setting SettingConnection Preset time codes Setting time codesTime code recording Recording time codes of a DV input terminalRecording index signals Recording methodRecording Audio dubbing Backup recording function Connection/setting Special playback function Basic playback methodFast forward/rewind Frame advance reverse playbackLocate function Special playbackVariable speed playback Index searchRepeat playback  Repeat Mode item of the System 1/2 menuRepeat operation Ginning Press the Play button to begin replayPlayback signals  Setting the TC Adjust item of the Time Code menu Applicable model Panel to 9 PINRemote FF/REW Mode  The Remote SEL switch on the frontPanel can be set at any position Remote Set the unit to the Stop mode Display the menu for settingDisplay the TOP Menu Contents of the menus Contents of the menus Items Setting  Remote 2/2 menu32k  Display 1/2 menu Model  Display 2/2 menu Alarm  Warning display Displayed regardless of the Display modeRemote controller Main unit Press the Menu button  To set the unit to the Stop modeTo return to the usual screen Operate button is pressed260  Diagram of external dimension Unit mm
Top Page Image Contents