▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲
Note:
Sometimes the 8mm or VHS indicator will be ON, but you will be watching a TV or cable channel. This is because when a tape is not playing in a deck, the TV VIEW shows the Record Source.
8mm Section |
|
|
| Center Section |
|
|
|
|
| VHS Section | |||
| • | 8mm |
| VHSTUNER | L1 L2SAP | CATV |
|
|
|
| • | T I M E R 8mm | |
| • | REM |
|
|
| SAPSET | CH |
|
|
|
| • |
|
|
|
| • | A M |
|
|
|
|
| REC T U N E R | |||
|
|
| P M | STEREO VCR |
|
|
|
| |||||
S P | • |
|
| • |
| MONO |
|
|
|
|
| • | S L P I D X L1 |
H | M | S |
|
|
|
|
|
| |||||
| • |
|
| LOOP | E D I T | L |
|
|
|
|
| •6 | DUB L2 |
|
|
| dB 00 | 8 | 2 | 0 | 2 | ||||||
• |
|
| SEQ | C O P Y | R |
|
|
|
|
| • |
| |
|
|
|
|
|
|
|
|
| |||||
Clock/Counter/Time Remaining
The clock/counter display normally shows the clock time. The clock time displays in hours and minutes, with AM and PM indicated. Pressing the CLK/CTR key once gives you the tape counter for the active deck, in hours, minutes, and seconds. Pressing CLK/CTR a second time gives you the amount of time remaining on the tape in the active deck.
REM The REM indicator will be ON when the counter is showing the amount of time remaining on the tape.
LOOP The LOOP indicator will be ON when you have set the VCR Play Mode to LOOP in the AUTO FEATURES Menu.
SEQ The SEQ indicator will be ON when you have set the VCR Play Mode to SEQ in the AUTO FEATURES Menu.
EDIT The EDIT indicator will be ON when the Automatic Edit feature is in use.
COPY The COPY arrow will be on when you are copying an 8mm tape onto a VHS tape using the Copy Tape key. The COPY arrow will BLINK if you press the PAUSE key or the SYNC EDIT key during Copy Tape.
SAP The SAP indicator will be ON if the TV program being broadcast has a Second Audio Program signal.
SAP SET The SAP SET indicator will be ON if you have selected the Second Audio Program from a TV broadcast. Do this by changing the TUNER AUDIO selection to SAP or TV+SAP in the TUNER/CHANNEL MENU.
STEREO The STEREO indicator will be ON if the TV program being received has a stereo signal.
MONO The MONO indicator will be ON if you have selected MONO as the TUNER AUDIO selection in the TUNER/CHANNEL MENU.
CATV The CATV indicator will be ON if you have selected STD CATV, HRC CATV, or IRC CATV as your ANTENNA IN in the TUNER/CHANNEL MENU.
VCR The VCR indicator will be ON when the VCR is in VCR mode, and off when the VCR is in TV mode.
CH The CH indicator tells you the channel to which your VCR is tuned.