
▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲
Note:
Do not press QUIT from the SET |
TIMER RECORD MENU unless you |
want to ‘lose’ your settings. |
SELECT EVENT: 1
NO | TYPE | D AT E | T I M E | LENGTH |
*1 | N O R | 01 01 | 12:00 A M | 0:30 |
C H 0 2 TV V H S | SP | |||
2 : - - - | - - - - - | |||
3 : - - - | - - - - - | |||
4 : - - - | - - - - - | |||
|
|
|
|
|
Set CH to the channel on which the program will be shown. If you have a cable converter box, you’ll have to set this channel on the converter box. Set CH in the SET TIMER RECORD menu to whichever channel that you must keep your VCR tuned to (call your cable company for this infor- mation).
Set the tape speed to SP (press 1 ) , LP (press 2 , or SLP (press 3 ). On a
When you have finished setting the Timer Record, press MENU to save this information and to go back to the TIMER RECORD MENU.
TIMER RECORD SUMMARY
After you have programmed one or more Timer Record Events, the information for these events will be displayed on the TIMER RECORD SUMMARY.
From the TIMER RECORD MENU, use the arrow keys to move to the TIMER RECORD SUMMARY. Press SELECT to enter the TIMER RECORD SUMMARY screen.
An asterisk (*) next to an event means that the event is currently being recorded. To delete an event, use the arrow keys to move to that event, and press RESET
To change the information for an event, press the number key for that event, or use the arrow keys to move to the event. Press SELECT to enter the SET TIMER RECORD screen for that event.
Once you’re in the SET TIMER RECORD screen, press SELECT until you get to the information that you want to change. You may have to press SELECT more than once. Then, follow the above instructions under SET TIMER RECORD to change the information. Remember to press MENU (do not press QUIT ) to save your changes and return to the TIMER RECORD menu.
ON SCREEN MENU SYSTEM 67