▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲
SET CLOCK MENU
SET MONTH : 01
J A N 1994 |
|
| 12:00 AM | |||
SU | MO | TU | WE | TH | FR | SA |
|
|
|
|
|
| 1 |
2 | 3 | 4 | 5 | 6 | 7 | 8 |
9 | 10 | 11 | 12 | 13 | 14 | 15 |
16 | 17 | 18 | 19 | 20 | 21 | 22 |
23 | 24 | 25 | 26 | 27 | 28 | 29 |
3031
WHEN OK PRESS MENU
Note:
You must set the date and time before you can use the Timer Record feature and the Date/ Time Stamp feature.
AUTO FEATURES MENU
1: | AUTO PLAY/REW | - | OFF |
2: | KEY TONES | - | OFF |
3: | PLAY MODE | - NORMAL | |
MENU KEY FOR PREV MENU
SELECT KEY TO CHOOSE
ARROW KEYS TO CHANGE
Tip:
To cycle through all the choices for an item, you may need to press SELECT more than once.
While in the AUTO FEATURES |
menu, you can press MENU to |
return to the SETUP MENU, or |
QUIT to exit the menu system. The |
your new settings. |
While in the SETUP menu, press 2 to enter the SET CLOCK menu. Use the SET CLOCK menu to set the current date and time. Use the numeric keys, and follow the prompt at the top of the calendar. You will set the MONTH, YEAR, DAY, HOUR, MINUTE, and AM (press 1 ) or PM (press
2), in that order. All fields except AM/PM are two digits long, so remember to enter a 0 as the first digit for a one
digit entry. For example, enter January as 0 1 . For the year, enter the last two digits. For example, enter 1994 as
94 . When you are through entering information, press MENU to save the information and to go back to the SETUP menu. Warning: Do not press QUIT from the SET
CLOCK menu unless you want to ‘lose’ your new settings. Press QUIT to leave the SET CLOCK menu if you enter it accidentally.
AUTO FEATURES MENU
From the SETUP menu, press 3 to enter the AUTO FEA- TURES menu. There are three automatic features which you can choose to turn on or off in this menu.
1.Press SELECT to set AUTO PLAY/REW to BOTH (tape automatically plays when inserted and rewinds when it reaches the end of the tape), OFF (tape does not auto- matically play or rewind), auto PLAY only, or auto REW only.
2.Use the arrow keys to move to KEY TONES. Press SELECT to set KEY TONES to ON if you want feedback on your keypresses, or OFF if you do not. When set to ON, the VCR will beep once if your keypress is correct, and twice if it is in error.
3.Use the arrow keys to move to PLAY MODE. Press SELECT to set PLAY MODE to NORMAL if you want to play a tape normally, without sequencing or looping with the other deck. Set to SEQ if you want Sequential Play, and LOOP if you want Loop Play. See the Special Playback Modes section of this manual for a discussion of Sequential and Loop Play modes.