▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲
“My remote control isn’t working.”
“When I use Copy Tape, the VHS tape ejects.”
“When I use Copy Tape, there’s no sound.”
“Sometimes the tape begins to play or rewind when I don’t want it to.”
“Sometimes when I push a button, the VCR beeps twice but doesn’t do anything.”
There are several things which could cause your remote control to not function properly. First, make sure that you are aiming the remote control directly at the VCR. Make sure there are no obstacles between the remote control and the VCR, so the “beam” from the remote control is not obstructed on its path to the VCR. Make sure the batteries in your remote control are fresh, and installed properly. Finally, the signal from the remote control to the VCR can be disrupted if there is a neon light nearby.
Make sure that there is a Record Safety Tab on your VHS tape. If the tab is missing, you can place a small piece of transparent tape over the hole. This will allow you to copy onto the tape.
Check the AMERICHROME COPY menu. The AUDIO IN- SERT option should be set to OFF. If it is set to ON, the VCR is expecting sound to come from a source other than the 8mm tape, so it turns the sound OFF that tape.
The 8mm/VHS
The 8mm/VHS