Daewoo VCR MECHANISM UNIT Deassembly and Replacement, Removal of the Front Loading Ass’y Fig

DEASSEMBLY AND REPLACEMENT

1.Removal of the FRONT LOADING Ass’y (Fig. 3.1)

NOTE:

Remove the FRONT LOADING Ass’y in eject mode.

a.Unscrew the 2 screw holding the F/L.

b.Separate the F/L Ass’y from the MAINBASE settling down point by lifting the rear part of F/L (Screw Hole).

Fig. 3.1 Removal of the FRONT LOADING Ass’y

2.Deassembly of FRONT LOADING Ass’y (FIg. 3.2~3.5)

a.Remove the 1 washer for holding the door opener and separate F/L Assembly by moving the DOOR OPENER in the direction of arrow.

b.Remove the 2 screw holding the TOP PLATE and sepa- rate the CASSETTE HOLDER Ass’y by moving the FL BRKT L and FL BRKT R in the direction of arrow. (Fig. 3.2)

FIg. 3.2 Deassembly of the FRONT LOADING Ass’y

c.Separate the FL LIFT SPRING by twisting and dragging from FL BRKT R. (Fig. 3.3)

FIg. 3.3 Deassembly of the FL BRKT Ass’y

10