Daewoo VCR MECHANISM UNIT service manual Mechanical Mode Operate without a cassette tape

Page 19

MECHANICAL ADJUSTMENT (CONTINUED)

3.Mechanical Mode (Operate without a cassette tape)

a.Remove the FRONT LOADING Mechanism from the DECK Mechanism.

b.Cap the IR LED and pull the FL RACK. This has the same effect with cassette loading to the deck.

c.If the S/T POLE BASE is loaded, Play mode starts auto- matically. If you want other function, press the corre- sponding button.

d.Turn off the poser when the Mechanism is in the desired position.

4.Adjustment of the position of the TENSION POLE (Fig. 4.6)

a.Place the Mechanical mode in the play mode. Refer to the above section “3. Mechanical mode”.

b.Confirm that the TENSION LEVER is aligned with the datum hole of the MAINBASE.

c.If the requirement “b” is not satisfied, turn the BAND BRAKE ADJUST CAP clockwise or counterclockwise until the two datum holes alignes with each other.

FIg. 4.6 Adjustment of the TENSION POLE

18

Image 19

Contents VCR Mechanism Unit Contents Assembly diagram Deck Assembly diagram A. Upper View Assembly Diagram and A/SLower View Front Loading Assembly diagram Wire Diagram Connector Pin Arrangement Wire DiagramPeriodic Maintenance and Service Schedule Periodic Maintenance and Service ScheduleService Schedule for the Major Parts Service Schedule for the Major PartsList of Jigs and Tools Jigs and ToolsSketch of Jigs and Tools Deassembly of Front Loading Ass’y .2~3.5 Deassembly and ReplacementRemoval of the Front Loading Ass’y Fig Deassembly of the Cassette Holder Ass’y Deassembly of Drum Ass’y FigDeassembly of the Loading RACK, Loading Deassembly of the A/C Head ASS’Y Fig10 Deassembly of the LC Bracket ASS’Y from Deassembly of the CAM GEAR, Relay LEVER, FL Rack FigDeassembly of the Capstan Motor Fig Deassembly of the Tension Band ASS’Y FigDeassembly of the FE Head Fig Deassembly of the Reel TABLE, Idler Plate Total ASS’Y Fig Deassembly of the Reel Brkt Total ASS’Y, Connect Plate FigMechanical Adjustment .1~4.4 Mechanical AdjustmentAssembly reference between the Loading Rack Adjustment and measurement of the Back Tension .5Adjustment of the position of the Tension Pole Fig Mechanical Mode Operate without a cassette tapeA schematic diagram of the tape transporting section Adjustment of the Tpae Transporting SectionCleaning Adjustment of the Tpae Transporting SystemAdjustment of the Audio AZIMUTHFig Adjustment of the S/T Guide RollerAdjustment of the AC Head ASS’YTILT Adjustment of the AC Head HeightFigAdjustment of the LINEARITYFig Playback Phase ADJUSTMENTFigReview Adjustment of the wave form of Drum Entrance / Exit FigPosition Adjustment of the Audio AzimuthExploded view of Deck Ass’y Top View Exploded View and Parts ListExploded view of Deck Ass’y Bottom View Exploded view of FL Ass’y Exploded view Drum Total Ass’y D0040 D0020 D0050 D0010 D0060 D0070LOC Part S/N Part Name Part Discription Ntsc M1OOO Parts List of Deck Total Ass’y continud Parts List of Deck Total Ass’y LOC Part S/N Part Name Part Discription Ntsc Mail G7F00E@web.dwe.co.kr TEL FAX