Sherwood VD-4500 manual Connecting to a TV, If yourTV has S-Video input connector, Left audio

Page 15

System Connections

Connecting to a TV

This player has 3 kinds of video output jacks. Select one of the following connections.

•Video jack connection: Use the supplied audio/video Connection Cable to connect.

•S-Video jack connection: For higher quality video than video jack connection.

•Component jack connection: For higher quality video than S-video jack connection.

Note

The DVD Player can output NTSC or PAL format video depending on the setting on page 30. Make sure your TV supports the disc’s video format.

■If your TV has component input connector (necessary for progressive function)

Video connection

Using a component video cable (sold separately), connect the VIDEO OUTPUT COMPONENT jacks to the corresponding component video input jacks on the TV. Actual labels for component video inputs may vary depending on the TV manufacturer. (e.g., Y, PB, PR or Y, CB, CR)

In some TVs or monitors, the color levels of the playback picture may be reduced slightly or the tint may change. In such a case, adjust the TV or monitor for optimum performance.

Note

This connection is necessary to use progressive function. To view Progressive scan video, you need a TV with Progressive scan capability. Please check your TV’s manual.

Audio connection

Using the supplied audio/video cable, make audio connections from the ANALOG OUTPUT L and R jacks to the corresponding audio input jacks on the TV.

■If yourTV has S-Video input connector

Video connection

Using an S-video cable (sold separately), Connect the VIDEO OUTPUT S VIDEO jack to the corresponding S-video input jack on the TV.

Audio connection

Using the supplied audio/video cable, make audio connections from the ANALOG OUTPUT L and R jacks to the corresponding audio input jacks on the TV.

■If your TV has video input connector

Video connection

Using the supplied audio/video cable, make video connection from the VIDEO OUTPUT VIDEO jack to the corresponding video input jack on the TV.

Audio connection

Using the supplied audio/video cable, make audio connections from the ANALOG OUTPUT L and R jacks to the corresponding audio input jacks on the TV.

Note

Be sure to match the colors of the plugs on the cable with the corresponding jacks on the DVD Player and the TV: yellow for video, red for R (right) audio and white for

L (left) audio.

14

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Page VD-4500 Do not Expose this Appliance to Rain or Moisture IntroductionSafety Introduction Australia PrecautionsContents Examples of playerble DVD Videos U. S. a Playable DiscsRegion code About playing copy-controlled CDsVideo CD not equipped with PBC function Version When saving files onto mediaAbout Video CDs MP3/WMA/JPEG CompatibilityMP3 / WMA / Jpeg Care and Handling of DiscsDifferences in Disc Composition Video CD / CDControl Position and Name Front PanelRear Panel Display Examples DisplayRemote Controller Insert the two batteries size AAA/R3 Preparing the Remote ControllerInserting the Batteries Using the Remote Controller Replace the battery compartment coverOptical digital terminals System ConnectionsBefore Making Any Connections AV Cables & SocketsLeft audio Connecting to a TVIf yourTV has S-Video input connector If your TV has video input connectorAnalog connection Digital connectionTurning on Connecting the PowerDVD Player enters standby mode Standby indicator lights up To switch off the main power, press Power againTo remove the disc Basic PlaybackStarting Playback To stop playbackVarious Playback Rotating a Picture Jpeg Files Only Various Play ModesPlayback Press Enter Other OperationsDuring stop mode, press Program Video CD / CD Program PlaybackProgram edit Insert trackSelected value is deleted Delete programClear program List New track will be inserted after below the selected columnEnter MP3/WMA/JPEG Program PlaybackRepeat Play To cancel random playTo cancel repeat play Random PlayViewing Information To cancel A-B Repeat playChanging the Camera Angle DVD settingsSelecting a Playback Audio Setting Changing the Subtitle LanguageCustomizing the Function Settings Progressive SettingSetting Steps General Setup On OFF Audio SetupPreferences OFF Bitstream PCMTo select other language SubtitleDisc Menu To change the parental lock level To change the passwordReset ParentalTroubleshooting Troubleshooting Specifications DVD Menu Language Code List
Top Page Image Contents