Turning on
Connecting the POWER
The 
ON). When the power cord is plugged in for the first time, the
Notes
•Make sure that all appropriate connections have been completed as described on page 13 to 15.
•Turning on the DVD Player may cause a momentary power surge, which might interfere with other electrical equipment such as computers. To prevent interference, use a wall outlet on a different circuit.
POWER | STANDBY Indicater |
1 Plug the power cord into the power outlet on the wall.
2 | Press POWER to switch on the main power. | POWER ON |
| STANDBY |
|
|
|
The DVD Player enters standby mode.
The STANDBY indicator lights up.
3 Press PLAY/PAUSE 
on the DVD Player or
Press POWER ON on the remote controller.
The DVD Player turns on and the STANDBY indicator turns off. It takes several seconds to read the disc in the disc tray.
• To put the DVD Player in the standby mode, press STANDBY 
on the remote controller.
Notes
• You can turn on the DVD Player by pressing
OPEN/CLOSE 
or PLAY/PAUSE 
.
•Setting the STANDBY 
button to standby does not shut off the power completely.
• While the STANDBY indicator lights up, the DVD Player can receive signals from the remote controller.
However, if you press POWER on the DVD Player to switch off the main power, the remote controller cannot be used to turn on the DVD Player.
• To switch off the main power, press POWER again.
16