Oki B6200 Series manual Error Messages, Message content Reference

ERROR MESSAGES

If an error message is displayed at the control panel, follow the instructions to fix the error. Depending on the message content, follow the instructions in the Reference column below to fix the error.

Message content Reference

An error code xxx-xxx is displayed.

Refer to the Reference guide for a list of error codes.

Paper jam or “Remove paper” Refer to “If paper jams” on page 56. is displayed.

Installing and replacing the	Refer to procedures described on the consumables packaging
drum-toner cartridge	box or “Installing the Drum-Toner Cartridge” on page 35.
Loading and replenishing	Refer to “Loading paper” on page 40.
paper

The following section explains the contents and actions required for the more complex messages. For details on messages not described here, refer to the Reference Guide.

Message	Condition/Reason/Action
Corrupt HDD File.	When the hard disk (option) is installed, the printer assumes that data
Press SEL key	in the hard disk is corrupted if power is cut off when the printer is in
	use.
	Press the <FEED/SELECT> button on the control panel. The hard disk
	will be initialized.
	Initializing the hard disk will delete data for registered forms, logos,
	secure print, and PostScript download fonts.
Corrupt Log file	When the hard disk (option) is installed, the printer assumes that data
Press SEL key	in the hard disk is corrupted if power is cut off when the printer is in
	use.
	Press the <FEED/SELECT> button on the control panel. The log file
	will be initialized.
	It can take 1 minute to initialize the log file. Do not switch off the
	power of this printer when initialisation is in progress.
Incorrect paper	Paper of the type specified under [Paper Type] in the printer driver is
type Reselect	not loaded in the trays. Press the <FEED/SELECT> button on the
	control panel to print on paper of another type or press <CANCEL> to
SEL to print	cancel the job.
CANCEL to cancel

ERROR MESSAGES > 61