LaCie d2 user manual Connecting The Power Supply, Cable a

LaCie d2 DL DVD±RW Drive – Toast 7 Titanium	3. Installing Your LaCie Drive
User’s Manual	page 16

3.2. Connecting The Power Supply

There are two cables that are supplied with the power supply: one cable (A) connects to the LaCie drive; and the other cable

(B) connects to a power outlet, such as a wall outlet or a surge protector.

1	3
	2
	Cable B
Cable A	Power Supply brick

1Connect Cable A to your LaCie Drive.

2Connect Cable B to the Power Supply brick.

3Connect Cable B to a grounded surge protector or wall outlet.

Your drive should now turn on automatically when you connect it to a FireWire port on your computer.

Caution! Use only the AC adapter supplied with your specific LaCie drive. Do not use a power supply from another LaCie drive or another manufacturer. Using any other power cable or power supply may cause damage to the device and void your warranty. Always remove the AC adapter before transporting your LaCie drive. Failure to remove the adapter may result in damage to your drive and will void your warranty.

Important Info: You may use your LaCie drive when in a foreign country, thanks to its autoswitching 100-240 Volt power supply. To be able to use this feature, you may need to purchase an appropriate adapter or cord. Consult LaCie Technical Support for assistance in choosing the right adapter. LaCie accepts no responsibility for any damage to the drive resulting from the use of an inappropriate adapter. Using an adapter other than one authorized by LaCie will void your warranty.