Sylvania DVC800C owner manual Settings, Changing the Audio Language or Sound Mode

SETTINGS

CHANGING THE AUDIO

LANGUAGE OR SOUND MODE

DVD CD

The DVD/VCR has a function which allows you to select the desired audio language and sound mode.

For DVDs

1Press the AUDIO button during playback.

¡The current audio status will appear at the top.

2Press the AUDIO button repeatedly until you see the language of your choice.

¡The audio language mode can be changed only if the disc is recorded with a multiple language setting.

AUDIO 1.ENG DolbyD 5.1CH 48k/3

AUDIO 2.FRE DolbyD 5.1CH 48k/3

AUDIO 3.JPN DolbyD 5.1CH 48k/3

Notes

¡Pressing the Audio button may not work on some DVDs with multiple audio languages (e.g. DVDs which allow audio language setting on the disc menu). Operation varies between discs, so refer to the manual accompanying the disc.

¡The current audio language and sound mode will be displayed when you first press the AUDIO button.

¡If the desired language is not shown after pressing the Audio button several times, the disc does not have an audio source in that language.

¡The audio language resets to the one which was selected in the setup mode every time the power is turned on or discs are replaced. If that language is not available on a disc, a language defined by the disc will be selected.

¡The screen display will disappear after about 5 seconds.

¡If you use DIGITAL AUDIO OUT jack, the sound mode of audio CDs can not be changed.

HELLO Bon jour

For audio CDs

Press the AUDIO button during playback.

¡Pressing the AUDIO button cycles the sound mode through STEREO, L-CH and R-CH.

AUDIO STEREO

Both right and left channels are active (stereo).

AUDIO L-CH

Only the left channel is active.

AUDIO R-CH

Only the right channel is active.

– 31 – EN

1L25