Magnavox MDV630R, MDV650R manual Connecting with a S Y/C cable

6	Insert one end of the supplied power cable into the power outlet
	4MAINS at the back of the DVD recorder and the other end
	into the wall socket. '￿￿ ￿￿ ￿￿￿' will appear on the display.

Then, read 'Initial installation' in 'Installing your DVD recorder.'

Connecting with a S (Y/C) cable

Have the following cables ready:

an antenna cable (1, supplied), a power cable (2, supplied), a S-video (SVHS) cable (3), an audio cable (4, supplied red/white jack).

1Remove the antenna cable plug from your TV. Insert it into the ANTENNA jack at the back of the DVD recorder.

2Insert one end of the supplied antenna cable into the TV jack at the back of the DVD recorder and the other end into the

antenna input jack at the back of the TV.

3Use a S-Video (SVHS) cable and plug one end into the OUT S-VIDEO (Y/C) jack at the back of the DVD Recorder and the

other end into the S-Video (SVHS) In jack of the TV (usually called S-Video in or SVHS in. Please see your TV's owner's manual).

4Use the supplied audio (cinch) cable and plug one end into the red/white cinch jack OUT L AUDIO R at the back of the DVD Recorder (next to OUT S-VIDEO (Y/C) ) and the other into

the corresponding red/white audio input of the TV (usually called Audio in', 'AV in'-please see your TV's manual).

5Switch on the TV. Then switch the set to the SVHS input jack or select the corresponding channel number. You will find the

channel number in the operating instructions of your TV.

ENGLISH

Connecting the DVD recorder 23