Magnavox MDV630R Adding and deleting TV channels manually, AVery few TV channels were found

aVery few TV channels were found

b During 'Automatic channel search' the DVD recorder detects whether an antenna or a cable TV signal is connected. If you have connected a cable TV signal but found very few TV channels, you must search the channels manually.

To do so, select 'Cable/Antenna' insted of line 'Auto Ch.

Programming' in step 6 and confirm with	C .
If you select 'Cable', channels 1-125 will	be available. If you select
'Anten.', channels 2-69 will be available. Select your type of
connection by pressing C repeatedly
'Anten.', 'Cable' or Auto.' automatically detects which one you have.
Confirm the setting with OK .
Press SYSTEM-MENUto go to the next menu. Press OK to start
channel search as prompted by the on-screen message. When the
channel search is complete, press SYSTEM-MENUrepeatedly to
remove all the menus.	Problem

You can read about how to search for a TV channel manually in the following section 'Adding and clearing TV channels manually'.

ENGLISH

Adding and deleting TV channels manually

1Turn on your TV. If required, select the TV's Audio/Video In (or channel 3 or 4).

2Press STANDBY m to turn on the DVD recorder. Press theSYSTEM-MENUbutton on the remote control. The menu barwill appear on the TV screen.

3Select 'A' using D or C .

4	C .	B repeatedly B to select 'Installation' and then press
	Press

5Select line 'Add/Delete Channels' using B or A then press

C .

6	Using B or A select the TV channel that you want to delete
	or add.

7Press C or D to choose 'Add' or 'Delete'.

8Repeat steps 6 to 7 until you have added/deleted all the TV channels you want.

9 To save your channel selections, press OK .

Installation

Add/Delete Channels

...
• Channel 001	Add
Channel 002	Add
Channel 003	Delete
Channel 004	Delete
Channel 005	Delete
Channel 006	Delete
...
	To exit press
	SYSTEM MENU

Installing your DVD recorder 33