Magnavox MDV650R Cannot playback Super Video CDs, Programmed recording does not work, System

PROBLEMSOLUTION

I cannot playback (Super) Video CDs

bIt is possible that this (Super) Video CD contains a menu and the 'PBC' is switched off. You can see this in status field 'PBC OFF'. To activate this function, proceed as follows:

1Press SYSTEM-MENUwhile the (Super) Video-CD is inserted.

2Select 'A' using D or C .

3 Select line 'Features' using B or A and confirm with C .

4Select 'On' in line 'PBC' using B or A .

5 Confirm with OK and end with SYSTEM-MENU .

Poor playback on DVD recorder (distorted picture/distorted sound)

No recording possible.

bYour TV is not properly adjusted. bThe disc is dirty. Clean the disc.

bSometimes the picture may be temporarily distorted. This is not a defect of your DVD recorder.

bThe TV channel you want to record is not stored or you selected the wrong program number: Check TV channels stored.

bDisc is write-protected (cannot be recorded on). Remove write-protection or change disc. For more information, please see 'Preventing accidental erasing of discs' on the 'Manual Recording' page.

bA finalized DVD+R disc has been inserted. Change disc.

Programmed recording does not work.

bYou have programmed the wrong time or date. Check time/date.

bYou have not set the TIMER properly. Check the programmed recordings. bA locked disc inserted. Remove disc lock.

bA finalized DVD+R has been inserted. Change disc.

The wrong TV channel was

entered after you	1	Enter the PlusCode programming number of the desired TV channel.
programmed a recording	2	Confirm with OK .
using the VCR Plus+	3	Check the channel number in the 'Ch.' input field
system.	4	If this does not correspond to the desired TV channel, select the channel field and
		change the channel number.
	5	Confirm with OK .

There is picture or sound interference with the TV reception.

bDuring playback via the internal TV tuner ( MONITOR button), switch to recording mode 'HQ' by pressing REC MODE . This will give you the best possible picture quality.

Before making the recording, select the recording mode as described in 'Selecting the recording mode (quality)' .

bChange channels at the TV. Press CH- or CH+ to go to channel 4, 3, or Audio/Video In, EXT IN, ANT IN, etc.

bHave your antenna or Cable TV signal checked.

Distorted sound coming from a connected hi amplifier

The picture is distorted or black during

playback.

No sound signal at the digital output

bThe DVD recorder is connected to the 'Phono-input' of your amplifier. This jack is provided only for record players without a preamplifier. Connect to a different audio input.

bThe TV system of the disc does not match that of your TV (PAL/NTSC).

bThe recording can be made in color only when the TV channels or the connected additional device sends a color signal. Black-and-white signals without color information (color subcarriers) cannot be recorded in color.

bCheck whether the sound settings match the selected inputs and connected additional devices.

82 Before you call technical support