Magnavox MDV630R, MDV650R manual Inserting chapter markers, AIf display reads

5To start recording, press REC/OTR n on the remote control or RECORD on the DVD recorder. To start the recording after

all other recordings on the disc, press and hold the REC/OTR n button until '￿￿￿￿ ￿￿￿' appears in the display.

For DVD+Rs, each recording is always started after all previous recordings since previous recordings cannot be overwritten.

The display panel will appear similar to the example shown at right.

	Inserting chapter markers
	During recording, scenes can be marked so they can be found or hidden
	later.
	During recording, press EDIT at the desired location. 'Inserting
	marker' appears on the TV screen. In the display, the number of
	'CHAPTERS' is increased by one.		Tip
	For more information about title/chapter, please read the	section
	'Changing to a different title/chapter' in the chapter 'Playback'.
6	You can stop recording by pressing STOP h on the remote or
	hSTOP on the recorder. '￿￿￿￿ ￿￿￿￿' will appear	on the
	display. The DVD recorder is preparing the list of contents. Wait
	until this message disappears in the display, then the recording is
	completed.
	aIf display reads '￿￿￿￿ ￿￿￿'
	b The recording could not be completed correctly because of a disc		Problem
	error. Check and clean the inserted disc if necessary.

￿ ￿ ￿￿￿ ￿￿￿ ￿￿￿

ENGLISH

Making recordings on DVD+R discs compatible

If you want to playback recordings on a DVD player, you must first finalize the disc in the DVD recorder. You can use the 'Finalizing' function on the DVD so that it can be read by the DVD player without problem. Please read paragraph 'Finalizing DVD+R discs' in the chapter Tip 'Managing disc content'.

Recording 55