JVC DR-MH20SUJ, DR-MH30SUJ Cable Box and/or DBS Receiver Control Setting, Installing Controller

Filename [DR-MH30UJ_04Name.fm]
DR-MH30UJ_00.book Page 24 Monday, July 12, 2004 3:17 PM	Masterpage:Left+

24 EN INITIAL SETTINGS

Cable Box and/or DBS Receiver Control Setting

The following procedure is required if you receive your TV channels through a cable box (descrambler) and/or if you receive satellite channels through DBS (Direct Broadcast Satellite) receiver. The Controller allows the unit to automatically switch the cable box and/or DBS receiver’s channels during timer recording.

NOTES:

●The Controller is effective for “VCR Plus+® Timer Programing” ( pg. 46), or “Manual Timer Programing” ( pg. 48).

●When connecting your cable box, refer to its instruction manual.

Installing Controller

1 If both a cable box and a DBS receiver are used, position the Controller so its signal reaches the receiving windows of both the cable box and DBS receiver.

2Fix securely using the adhesive strip attached on the back of the Controller.

Cable box or DBS receiver

Your unit

Controller (suggested locations)

3 Connect the controller to the unit.

a

Cable box or DBS receiver

To RF output	To Audio/video
	output

Transmitter

Controlleror

To ANTENNA IN		To AUDIO/
		VIDEO INPUT
Your unit
CABLE
	BOX

If your cable box or DBS receiver does not have audio/video output connectors

Connect the RF output connector on the cable box or DBS receiver to the ANTENNA IN connector on the rear of your unit.

If your cable box or DBS receiver has audio/video output connectors

Connect the audio/video output connectors on the cable box or DBS receiver to the AUDIO/VIDEO INPUT connectors on the rear of the unit.

●If both a cable box and a DBS receiver are used, it is recommended that you connect the DBS receiver to your unit’s AUDIO/VIDEO INPUT connectors and the cable box to your unit’s ANTENNA IN connector.

4Connect the Controller to the CABLE BOX connector on the rear panel.

Setting Brand And Channel

After installation, set the cable box and/or DBS receiver’s brand and channels correctly; otherwise, the Controller cannot work correctly.

●Turn on the unit.

●Turn on the TV and select the AV mode.

●Slide the TV/CABLE/DBS/DVD switch to DVD.

CABLE/DBS

TV DVD

ENTER

rtwe

SET UP

1 Turn on the cable box and/or DBS receiver.

2 Press SET UP to access the Main Menu screen.

3Press w e to select “INITIAL SET UP”, then press t.

4Press w e to select “STB SET UP”, then press t.

5Press rt to select “CABLE

BOX SET” or “DBS RECEIVER	DVD VIDEO SET UP	HDD/DVD SET UP	FUNCTION SET UP	INITIAL SET UP
	TUNER SET UP	STB SET UP	CLOCK SET UP
SET”, then press ENTER.
		CABLE BOX SET	DBS REC VER SET

Page 24

6 Press rt to select “CABLE BOX OUTPUT CH” or “DBS RECEIVER OUTPUT CH”, then press ENTER.

SET UP	ENTER	SELECT WITH [	] THEN PRESS [ENTER]
		PRESS [SET UP] TO EXIT

EXIT SELECT

INITIAL SET UP > CABLE BOX SET

CABLE BOX OUTPUT CH	OFF
CABLE BOX BRAND	1

TEST MODE

SET UP	ENTER	SELECT WITH [	] THEN PRESS [ENTER]
		PRESS [SET UP] TO EXIT

EXIT SELECT

Monday, 12 July 2004 14:10