JVC DR-MH30SUJ, DR-MH20SUJ manual Manual Dubbing From HDD To DVD, Original Dubbing From DVD To HDD

Filename [DR-MH30UJ_09Editing.fm]
DR-MH30UJ_00.book Page 59 Monday, July 12, 2004 3:17 PM	Masterpage:Right+

			EDITING EN 59
Manual Dubbing (From HDD To DVD)	About Disc Remaining Display
	The unit displays the time information for dubbing by bar meter. By
It is possible to perform dubbing in the desired transfer rate.
	comparing the disc remaining time and the necessary time for
1 Load a recordable disc.	dubbing of the selected items, it is possible to check if the dubbing
2 Press DUBBING to access the Dubbing Menu screen.	can be performed completely or not.
	When performing the High Speed Dubbing
3 Press rtw e to select “MANUAL”, then press ENTER.
4 Perform step 4 of “High Speed Dubbing (From HDD To DVD)”.		Capacity of a disc	Remaining capacity
The Manual Dubbing screen appears.

5 Press rt to select “REC MODE”, then press ENTER. Press rt to select the desired option, then press ENTER. The confirmation screen appears.

NOTES:

●In Video mode, if the selected play list includes the scenes recorded in the different transfer rate, the dubbing is performed in the highest transfer rate of the scenes in the selected play list. However, the lower transfer rate cannot be dubbed in the higher transfer rate.

●It is not possible during dubbing to play back on HDD or DVD or to set timer-programing.

Original Dubbing (From DVD To HDD)

It is possible to dub the original recordings on DVD discs to the HDD deck.

1 Load a disc you want to dub.

2 Press DUBBING to access the Dubbing Menu screen.

3Press rtw e to select “TITLE”, then press ENTER.

4Press rtw e to select indexes (small pictures) of desired original recordings and/or play lists, then press MARK. After selecting all indexes you want to dub, press ENTER.

● You can select up to 8 original recordings and/or play lists.

5Press rt to select “EXECUTE” or “AUTO POWER OFF”, then press ENTER to start dubbing.

EXECUTE: Select this to continue the dubbing operations.

AUTO POWER OFF: Select this to continue the dubbing operations and turn off the unit after dubbing.

CANCEL: Select this to cancel dubbing operation.

6 Press w e to select “EXECUTE”, then press ENTER for confirmation. The dubbing screen appears for 5 seconds.

NOTES:

●It is not possible to dub play lists on DVD discs.

●It is not possible to dub pre-recorded DVD VIDEO discs.

21%

Dark green: Length of already recorded item

Light green: Length of selected item

Yellow: Length of the item now being selected by arrow

Red: Excess over the capacity

When performing the Just Dubbing

TOTAL 105MIN

●The unit displays the status on the assumption that the selected items are dubbed in the lowest transfer rate.

●The total time of a loaded disc is displayed on the right of the bar meter.

When performing the Manual Dubbing

MAX FR240

●The unit displays the status on the assumption that the selected items are dubbed in the lowest transfer rate.

●The available highest transfer rate is displayed on the right of the bar meter.

NOTE:

The bar meter moves up and down regularly, but this is not a malfunction.

Page 59

Monday, 12 July 2004 14:25