JVC DR-MH20SUJ, DR-MH30SUJ manual Other Problems, On-screen Message, For AV/S-video connection

Filename [DR-MH30UJ_10Subsidiary.fm]
DR-MH30UJ_00.book Page 76 Monday, July 12, 2004 3:17 PM	Masterpage:Left+

76 EN TROUBLESHOOTING

Other Problems On-screen Message

The image of the TV broadcast appears distorted on the TV screen.

For AV/S-video connection

]Press PROGRESSIVE SCAN for 3 or more seconds so that the Video output indicator ( ) lights off on the front display panel.

For component video connection

]Press PROGRESSIVE SCAN for 3 or more seconds so that the Video output indicator ( ) lights up on the front display panel.

Whistling or howling is heard from the TV during camcorder recording.

●The camcorder’s microphone is too close to the TV.

]Position the camcorder so its microphone is away from the TV.

●The TV’s volume is too high. ]Turn the TV’s volume down.

When scanning channels, some of them are skipped over.

●Those channels have been designated to be skipped.

]If you need the skipped channels, restore them. ( pg. 23)

The channel cannot be changed.

●Recording or Live Memory recording* is in progress.

]Press 9 to pause the recording, change channels, then press 4 to resume recording.

* HDD deck only

Channel settings that were made manually seem to have changed or disappeared.

●After the manual settings were made, Auto Channel Set was

performed.

]Perform “Manual Clock Set” ( pg. 22).

Even though Auto or Semiauto Clock Set has been performed, the clock is incorrect.

●The clock setting data received from the host channel is

incorrect.

]Select a different host channel during “Semiauto Clock Set” ( pg. 22), or perform “Manual Clock Set” ( pg. 22).

DISC NOT REGISTERED IN THE LIBRARY

REGISTER DISC?

●A disc that is not registered in the library has been inserted. Register the disc as necessary. ( pg. 56)

INSERT DISC XXXX

●Appears when a title that has been selected in the library is not contained in the loaded disc.

CAN NOT RECORD OR MAKE PLAY LIST

DELETE UNWANTED TITLES

●Recording and/or editing cannot be performed.

●The number of titles exceeds 99.

●The number of play lists exceeds 999.

SET CLOCK BEFORE TIMER PROGRAMING

●To set the timer program, the clock must be set in advance. ( pg. 22)

PROGRAM FULL

DELETE UNWANTED TIMER PROGRAMS

●You can program this unit to timer-record as many as 32 programs. To program more, you need to cancel a timer program already set. ( pg. 49)

DISC NOT LOADED

●Operation has been attempted when a disc is not loaded, or loaded upside down. ( pg. 10)

DISC NOT RECORDABLE

INSERT RECORDABLE DISC

●When a playback-only disc or a finalized disc is loaded, 7 has been pressed. ( pg. 7)

Page 76

Monday, 12 July 2004 14:10