Hitachi DV-RX5000U manual Remote control, Batteries, Use, Do not

Setting up

STEP 2 The remote control

Batteries

R6/LR6, AA, UM-3

-

+ + -

≥Insert so the poles (i and j) match those in the remote control.

≥Do not use rechargeable type batteries.

Do not:

≥mix old and new batteries.

≥use different types at the same time.

≥heat or expose to flame.

≥take apart or short circuit.

≥attempt to recharge alkaline or manganese batteries.

≥use batteries if the covering has been peeled off.

Mishandling of batteries can cause electrolyte leakage which can damage items the fluid contacts and may cause a fire.

Remove if the remote control is not going to be used for a long period of time. Store in a cool, dark place.

[Note]

If you cannot operate the unit or television using the remote control after changing the batteries, please re-enter the codes (television➜page 10, main unit ➜page 45).

Use

Remote control signal sensor

	20x
30x	20x
	30x

7 m (23 feet) directly in front of the unit

Do not:

≥Make sure that there is no obstacle between the infrared receiver of DVD video recorder and remote control.

≥Do not expose the infrared receiver to direct sunlight or other strong light, such as inverter fluorescent light.

[Note]

If you install the DVD video recorder on rack, etc., the remote con- trollable range may decrease depending on the thickness or color of glass door of rack.

STEP 3 Plug-in Auto Tuning
	DVD￿POWER ￿TV			DVD	TV
￿, DVD POWER
	VCR Plus+ TV/VIDEO REC MODE REC
Numbered	1	2		3				￿,￿,CH
buttons	4	5		6	CH
	7	8		9	VOLUME
	CANCEL
		0	100
	SKIP			SLOW/SEARCH
		A		E
	OP	P	US		PL	AY
	ST
	DIRECT NAVIGATOR				PLAY LIST
	TOP					MENU
3, 4, 2, 1	MENU
		ENTER
ENTER
ADD/DLT								RETURN
	FUNCTIONS				RETURN
	PROG/CHECK	ADD/DLT	CM SKIP		TIME SLIP
	OPEN/CLOSE STATUS			FRAME
SETUP	SETUP	AUDIO	INPUT SELECT DISPLAY
	ERASE	F Rec	POSITION MEMORY MARKER
POWER, ￿/I						￿,￿, CH
						OPEN/CLOSE
/ POWER/STANDBY						REC MODE	CHANNEL	REC	ERASE
						TIME SLIP	STOP PLAY SKIP/FR FF/SKIP

After plugging the unit into your household AC outlet and pressing [Í, DVD POWER] to turn the unit on for the first time, the unit assists you to set the menu language, and automatically tunes in all the channels it can receive and sets the clock.

The unit automatically determines the type of transmission (air or cable) and puts them into channels as follows.

	Band	Channel
TV Mode	VHF	2s13
(Air)	UHF	14s69
	VHF	2s13
	CATV LOW BAND	95s99
CATV Mode	CATV MID/SUPER BAND	14s36
	CATV HYPER BAND	37s65
(Cable)
	ULTRA BAND	66s94
		100s125
	SPECIAL CATV CHANNEL	1

6