Electrical connection
The electrical connections must comply with current legislation and be carried out by a qualified, competent person.
•Information on the voltage and power absorbed are shown on the serial no. plate.
•The appliance must be earthed.
•When installing the appliance, we recommend that this hob is protected by a 3mm
•If damaged, the power cable must be replaced with an identical type of powercable (
•Do not use extension cables.
•The manufacturer declines all responsibility for damage to persons, pets or goods as a result of failure to comply with the regulations above.
L
Earth (yellow/green)
N
Fixing the hob to the work top. Traditionally fitted model
Important: The following procedure must be carried out by competent technical personnel only. The hob can be installed on, or into different types of materials, such as masonry, metal, wood and heat resistant laminate coated wood (90°C).
Cut an opening in the worktop to the dimensions shown in the diagram.
Carefully place the gasket/seal on the external outline of the worktop, as shown in the diagram below. Apply a light but firm pressure to ensure a good adhesion to the work surface.
Fix the hob into the unit, and secure using the fixing brackets provided.
Note: the electrical power cable must be long enough to allow the hob to be lifted out from above.
10