KitchenAid KHPF 9010, KHPS 9010 manual Safeguarding the environment, Packing, Product

Page 8

Safeguarding the environment

Packing

The packing material is 100% recyclable and is

labelled with the recycling symbol . Please dispose of all packing responsibly and carefully.

Product

This appliance is marked according to the European Directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).

By ensuring that this product is disposed of correctly, you will help prevent potentially negative consequences for the environment and human health.

The symbol on the product, or on the documents accompanying this appliance indicates that this product should not be disposed of as household waste. Please dispose of this appliance at an Electrical & Electronic Equipment Collection point as in accordance with local environmental regulations for waste disposal. For details of your local Collection Point please contact your Local Authority.

Conformity declaration

This hob was designed, built and marketed incompliance with:

the safety requirements in the “Gas” CEE Directive 90/396

the safety requirements of “Low Voltage Directive” 2006/95/EC (replacing 73/23/EEC and subsequent amendments)

the protection requirements of the “EMC” CEE Directive 89/336

the requirements in CEE Directive 93/68

this appliance was designed to come into contact with foods and complies with EC Regulation 1935/2004

Note:

Incorrect placement of the pan supports can scratch the hob. To avoid this, always ensure that the rubber feet on the bottom of the pan supports are the only part of the pan supports that touch the hob. Do not drag the pan supports across the hob surface.

Do not use two burners to cook 1 pan.

In the event of prolonged usage, additional ventilation may be required (opening a window or increasing the extraction speed of the hood).

Warning

Keep children away from the hob when in use and don't let them play with the control knobs or any other part of the appliance.

Do not let children play with the pan supports. The rubber feet on the underneath of the pan supports could be swallowed by small children and cause serious injury or suffocation.

Before replacing the pan supports on the hob, please check that all the rubber feet are in place.

Each time you finish using the hob, always check that the control knobs are in the off position and shut off the tap to the gas mains or cylinder.

Do not obstruct the air vents at the back of the appliance in any way.

8

Image 8
Contents Khpf 9010 Khps Page Page Product description and symbols Using the burnersControl Symbols To turn on one of the burnersYou should never use Practical advice on using the hobPositioning the pan supports and wok support Hood and cabinetry clearances mm Injector tablePage Product Safeguarding the environmentPacking Installation Flush and Traditional fitting Technical information for the installerBefore installation, please ensure that Gas connectionElectrical connection Fixing the hob to the work top. Traditionally fitted modelImportant The following procedure must Dimensions shown in the diagramFixing the hob to the work top. Flush fitted model Be carried out by competent technicalAdaption to a different type of gas supply Replacing the injectorsTraditional burners T Wok Burner WFitting the wok burner Regulating the minimum flow level of the gas tapsGeneral cleaning & maintenance Care and maintenance of the gas burnersTroubleshooting guide After Sales ServiceFlame doesn’t stay on? Check that Pans are not stable? Check that5019 719