Kenwood DM-9090 Recording Analog input, Analog recording, 1Adjust the settings if required, A L

Page 26

Recording (ANALOG input)

DM-9090 (En)

The input jacks connected with audio cords accept analog signals. This unit records the analog signal from the REC IN jacks by converting it into digital signal. (This recording is simply referred to as analog recording.)

26

Preparation

1Open the write protect tab of the Mini

Disc to make it recordable.

7

2 Load the Mini Disc.

3Check the remaining recording time.

o

4Set the amplifier’s input selector to the source to be recorded.

ANALOG recording

1Adjust the settings if required.

1 Switch the REC MODE on.

REC MODE /CHARA.

2Select the setting adjustment mode.

JOG DIAL

4 ¢

DOWN

U P

PUSH SET

3Set the selection (by pressing the JOG

DIAL).

JOG DIAL

4 ¢

DOWN

U P

PUSH SET

Go to step 2 if setting adjustments are not required.

2Select ANALOG or MONO.

REC INPUT

Each press switches the mode. 1 REC MODE : off

2REC MODE : on (“D.REC LEVEL?” displayed.)

The modes are switched by rotating the JOG DIAL.

1	D. REC LEVEL?	: Digital recording level setting.
2	AUTO TIME?	: Setting of the time for detecting a no-sound
		blank section during automatic track num-
		ber marking.

3AUTO LEVEL? : Setting of the level for detecting a non- sound blank section during automatic track number marking.

4 FADE TIME?	: Setting of the fading time in fade-in and
	fade-out.

5REC= WRITING? : Setting of the UTOC writing after recording.

ÖFor details on the setting adjustment modes, see “REC MODE key”.

¢

ÖThe “D.REC LEVEL” and “FADE TIME” settings are not used during analog source recording.

Each press switches the mode.

1 ANALOG : Analog “stereo mode”

2DIGITAL 1 : Coaxial input mode

3 DIGITAL 2 : Optical input mode

4 DIGITAL 3 : Coaxial input mode

5 MONO	: Analog “monaural long-play mode”
			“ANALOG” lights up
	L ∞ 40 30 21 18
		15 12 9 7 5 3 1 0 OVER (−dB) ANALOG			DIGITAL
	R		1		2	3
PGM SEARCH					32kHz

	A N A L	O G
			MONITOR		48kHz
					44.1kHz

ÖMONO cannot be selected during recording pause.

ÖThe REC INPUT cannot be changed during pause in the MONO mode.

ÖThe analog “monaural long-play mode”allows to double the recording time compared to recording in the stereo mode.

Image 26

Contents DM-9090 Units are designed for operation as follows Introduction Before applying powerSafety precautions Factory fitted moulded mains plugContents Special feature AccessoriesImportant Safeguards Power OFF Information that you should know Safety Precautions Handling of Mini DiscInstallation position Dust countermeasureReference notes Beware of condensation Maintenance CleaningMemory backup Be especially careful in the following conditionsMD system System connections Digital input / output jacks OpticalAbout the system control connections About the system control operationsNames and functions of parts Listening through headphonesStandby mode Display / Main unitDescription of main unit keys Remote control unit Model RC-M0702 Infrared ray systemOperation Operation of remote control unitLoading batteries 1Remove the cover.2Insert batteries.3Close the coverPlaying tracks in order from track No Disc recorded in monaural modePlayback of Mini Disc Before playing a MDSelect the desired title PreparationPress the Title Search key T L ERandom playback 1Enter the track modeEnter the track mode Select the desired track numberTo pause playback Skipping tracksSearching in a track To stop playbackProgramming tracks in a desired order Initiate the program modeProgramming Select track numbers in the order you want to play themTo clear tracks from the program To add a track to the programChecking the order of tracks Clearing tracks from the endTo stop repeated playback Repeated playbackTo repeat only the programmed tracks To repeat the entire discSelect before starting recording Recording-related keys AUTO/MANUAL keyMonitor key REC LEVEL? REC Mode keySelecting the setting adjustment mode Auto TIME?When Auto LEVEL? is displayed When D.REC LEVEL? is selectedWhen Auto TIME? is displayed When Fade TIME? is displayedAnalog recording 1Adjust the settings if requiredRecording Analog input Select Analog or MonoStart recording Adjust the recording level. Main unit onlySelect Auto or Manual After recording, eject the Mini DiscSelect one of Digital 1, 2 Recording Digital inputDigital recording To fade in and fade out the musicTrack being played Track Erase Adjust the digital source recording levelUnlock Synchro recording with CD playback Digital recording and ScmsReordering tracks by moving them EditingSelecting the editing function type Erasing desired tracks Quick EraseV E Moving the track being played Track MoveSelect Move Select the move destinationExecute the track reordering operation To cancel the editing results Edit CancelImage of track moving Eject the Mini Disc2Select the track numbers to be moved Moving several tracks at a time Quick Move1Select Q.MOVE End the selection of the track numbers to be moved2 / Ç? Image of track insertionP Ç? / 0 0 8 / Ç? E2Preview the result Dividing the track being played Track DivideSelect Divide V I D E +Image of track division Image of previewExecute the track divide operation 5 + 5 +2Select the track to be combined Combined tracks are decreased automaticallyImage of track combination Execute the track combine operationA S E Erasing the track being played Track EraseSelect Erase Confirm that the track has been erasedImage of track erasure 2To erase desired tracks 1To erase all MD tracksR a S E 5 ? a B CImage of track deleting Quick Erase When Disc Error is displayedS C Error Erasing desired tracksTotal number of title characters About preset titlesEditing titles Characters usable in title editingL M Input the titleL M N W O O D 3To change or erase a titleN E O O D a B C Execute title change or deletion Title editing function keysScrolling the display S C1Transmit the CD text into the MD recorder CD text editingCopying the CD text Single C D t e x tTime Display key Changing the displayed contentsThis key allows to switch the mode of time display Fade keyTimer operations Timer playback, timer recordingSymptom Cause Operation to resetSymptoms related to MD standard Case of difficultyDisplayed Message Meaning Action Other symptoms Symptom Cause RemedySpecifications Memo For your records