Kenwood DM-9090 instruction manual Timer operations, Timer playback, timer recording

Page 50

Timer operations

Playback or recording can also be activated at the desired time by using a commercially available timer.

50

Connect the power cords of the associated components so that their power can be turned ON through the audio timer.

Also, be sure to read carefully the instruction manual of the timer. Do not set timer recording in a way that the power is not turned ON for more than 3 days; otherwise, the last recorded data may be cleared.

Refer to “Memory backup”. 8

Amplifier

DM-9090 (En)

Audio cord

Audio cord	Tuner

Audio timer

DM-9090

Timer playback, timer recording

1Turn the powers of the associated components ON.

ÖSet the POWER key of the unit to ON.

2Make preparations.

For timer playback

Load a prerecorded Mini Disc.

For timer recording

1Load a recordable Mini Disc.

2 Receive the desired radio station.

3 Select the desired source with the REC INPUT key.

¤

4Adjust the recording level. ÖFor timer recording, be sure to set the write protect tab to enable

recording.7

ÖFor timer recording, be sure to check the remaining recording time. o

3Set the amplifier volume.

For timer playback	For timer recording
1 Play the Mini Disc.	Minimize the amplifier volume.

2Adjust the amplifier volume.

3 Stop the disc.

4Set the TIMER.

For timer playback		For timer recording
TIMER			TIMER
REC	PLAY	REC	PLAY

OFF

OFF

ÖWhen the set time comes, the disc playback or recording starts

automatically. (Also be sure to read the instruction manual of the connected component carefully.)

5Set the timer ON time.

For timer playback

Set the timer so that it sup- plies power at the specified time.

For timer recording

Set the timer so that the tuner reception can be started at the desired time of the day.

ÖAfter having set the timer, be careful not to press the ON/STANDBY key of the remote control unit to ON; otherwise the timer operation would be activated.

Image 50

Contents DM-9090 Units are designed for operation as follows Introduction Before applying powerSafety precautions Factory fitted moulded mains plugContents Special feature AccessoriesImportant Safeguards Power OFF Information that you should know Safety Precautions Handling of Mini DiscInstallation position Dust countermeasureReference notes Beware of condensation Maintenance CleaningMemory backup Be especially careful in the following conditionsMD system System connections Digital input / output jacks OpticalAbout the system control connections About the system control operationsNames and functions of parts Listening through headphonesStandby mode Display / Main unitDescription of main unit keys Remote control unit Model RC-M0702 Infrared ray systemOperation Operation of remote control unitLoading batteries 1Remove the cover.2Insert batteries.3Close the coverPlaying tracks in order from track No Disc recorded in monaural modePlayback of Mini Disc Before playing a MDSelect the desired title PreparationPress the Title Search key T L ERandom playback 1Enter the track modeEnter the track mode Select the desired track numberTo pause playback Skipping tracksSearching in a track To stop playbackProgramming tracks in a desired order Initiate the program modeProgramming Select track numbers in the order you want to play themTo clear tracks from the program To add a track to the programChecking the order of tracks Clearing tracks from the endTo stop repeated playback Repeated playbackTo repeat only the programmed tracks To repeat the entire discSelect before starting recording Recording-related keys AUTO/MANUAL keyMonitor key REC LEVEL? REC Mode keySelecting the setting adjustment mode Auto TIME?When Auto LEVEL? is displayed When D.REC LEVEL? is selectedWhen Auto TIME? is displayed When Fade TIME? is displayedAnalog recording 1Adjust the settings if requiredRecording Analog input Select Analog or MonoStart recording Adjust the recording level. Main unit onlySelect Auto or Manual After recording, eject the Mini DiscSelect one of Digital 1, 2 Recording Digital inputDigital recording To fade in and fade out the musicTrack being played Track Erase Adjust the digital source recording levelUnlock Synchro recording with CD playback Digital recording and ScmsReordering tracks by moving them EditingSelecting the editing function type Erasing desired tracks Quick EraseV E Moving the track being played Track MoveSelect Move Select the move destinationExecute the track reordering operation To cancel the editing results Edit CancelImage of track moving Eject the Mini Disc2Select the track numbers to be moved Moving several tracks at a time Quick Move1Select Q.MOVE End the selection of the track numbers to be moved2 / Ç? Image of track insertionP Ç? / 0 0 8 / Ç? E2Preview the result Dividing the track being played Track DivideSelect Divide V I D E +Image of track division Image of previewExecute the track divide operation 5 + 5 +2Select the track to be combined Combined tracks are decreased automaticallyImage of track combination Execute the track combine operationA S E Erasing the track being played Track EraseSelect Erase Confirm that the track has been erasedImage of track erasure 2To erase desired tracks 1To erase all MD tracksR a S E 5 ? a B CImage of track deleting Quick Erase When Disc Error is displayedS C Error Erasing desired tracksTotal number of title characters About preset titlesEditing titles Characters usable in title editingL M Input the titleL M N W O O D 3To change or erase a titleN E O O D a B C Execute title change or deletion Title editing function keysScrolling the display S C1Transmit the CD text into the MD recorder CD text editingCopying the CD text Single C D t e x tTime Display key Changing the displayed contentsThis key allows to switch the mode of time display Fade keyTimer operations Timer playback, timer recordingSymptom Cause Operation to resetSymptoms related to MD standard Case of difficultyDisplayed Message Meaning Action Other symptoms Symptom Cause RemedySpecifications Memo For your records