Freecom Technologies 400 user manual Start Up, Hardware installation

Page 6

Freecom DVD RW Recorder

Chapter 1: Start Up

1.1Hardware installation

1.Connect the interface cable to the Freecom DVD RW Recorder.

2.Connect the cable of the power supply to the Freecom DVD RW Recorder and the power supply itself to the socket.

3.Connect the interface cable to the interface port of your computer.

4.Switch on the Freecom DVD RW Recorder.

Since USB .0 is backwards compatible with USB 1.1, the Freecom DVD RW Recorder canbeconnectedtoallUSBports.WhenconnectedtoaUSB1.1port, however,theperformance(datatransferrate)oftheFreecomDVDRWRecorder will be much lower than when the drive is connected to a USB .0 port.

Image 6

Contents DVD RW Recorder LS PRO Dear user Freecom Technologies GermanyUser’s manual ChapterGeneral information Hardware RequirementsSoftware Requirements Precautionary Measures and General Notes Media standardsHardware installation Start Up Power Switch Start UpDriver Installation Allocation of the drive letter to the Freecom driveInstalling the application software Special Instructions before Writing a CD / DVD Load the disc Using the DriveHow to Use the Discs Disc ejectionEmergency Eject Trouble shooting General problems Warranty