Tascam BD-R2000 owner manual 100, Component

Others

Problem	Symptom	Action	Reference
			Page
Data cannot be	The title to be dubbed is copyright	Titles that are copyright-protected cannot	(A page 23)
imported	protected.	be dubbed. Select a title that is not
		copyright-protected.
	The number of titles stored in the HDD	Delete or combine the titles in the HDD	(A page 62)
	has reached the maximum amount.	to reduce the amount of titles to less than
		500.
	The remaining space on the HDD is	Delete the titles in the HDD to increase the	(A page 62)
	running out.	remaining space.
The title/group name	Protection of the title/group name is	Turn protection off for the title/group name.	(A page 64)
cannot be changed	turned on.
The remote control unit	The battery of the remote control unit	Change new batteries for the remote	(A page 16)
does not work	has run out.	control.
	The remote control code of this	Change the “REMOTE CONTROL CODE”	(A page 16)
	unit and the remote control unit are	for the remote control to the same number
	different from each other.	used by this unit.
	A "LOCKED" message appears on the	Disable the "mode lock" setting.	(A page 82)
	display window of the unit.
The disc cannot be	A "LOCKED" message appears on the	Disable the "tray lock" setting.	(A page 82)
ejected	display window of the unit.
	The “READING” message does not	Pressing the [ M ] button at the front of	-
	disappear from the unit's display	the unit for five seconds or longer opens
	window, and the disc tray does not	the disc tray. To close the disc tray after
	open when the [ M ] button is pressed.	removing the disc, press the [ A ] button,
		and wait until the tray is closed and
		operation is turned off.
		(If the disc tray does not open after
		pressing the [ M ] button for five seconds or
		longer, consult our authorized dealer.)
The disc cannot be	A disc that cannot be played on this	Confirm that the disc is playable on this	(A page 10)
played	unit is inserted.	unit.
	The region code of the BD or DVD is	Confirm that the region number is playable	(A page 10)
	different from that of this unit.	on this unit.
	An unfinalized DVD disc that is	Use that device to finalize the disc.	-
	recorded using another device is
	inserted.
Output is at 480i	The component output setting may	Turn the power off, and turn it on again.	-
regardless of the	be changed to 480i after viewing at
component output	a setting of 1080/24p using a HDMI
resolution setting	connection.
The aspect ratios of	When two monitors are connected	When two monitors are connected	(A page 80)
the HDMI output and	respectively to the HDMI output	simultaneously, users are recommended
component output are	and component output terminals of	to set “VIDEO PRIORITY MODE” to
different	this unit, the screen aspect ratio of	“COMPONENT”.
	the component output may not be
	appropriate if “VIDEO PRIORITY
	MODE” is set to “HDMI”.

100