Tascam BD-R2000 owner manual Importing Data from a USB- compatible Device to

Dubbing/Importing

Importing Data from a USB- compatible Device to the

HDD

Data on devices connected to the USB terminal can be imported to the HDD as follows.

•File formats that can be imported

AVCHD, SD-VIDEO, and JPEG

Memo:

•Titles that are imported using “FULL IMPORT” combined into one title. This unit does not support combining of titles during the editing operation after import is complete. To combine and import data, select “FULL IMPORT”.

•For data that is selected for import via “SEL.

TITLE(VIDEO)”, titles with the same date are combined.

•Titles of two or more scenes cannot be combined if the recording criteria, such as video size, are different.

Note:

•Turn off the power for this unit and the connecting device if an USB compatible device is to be connected to this unit.

•Do not unplug the USB cable while importing a title.

Doing so may result in loss or damage of the titles.

•Only titles that are not copyright-protected can be imported.

•Recognizing the device and importing the files may take a long time depending on the amount of files in the USB device.

•If a USB connection is used, this unit will only recognize one device out of all the recording devices.

Depending on the video camera, the memory card slot will be recognized but the internal device will not be recognized. Use the following methods to solve this.

•If the internal device is not recognized:

Copy the data from the camera’s internal memory or HDD onto the SD card.

•If the target device is not recognized using the USB connection, use the camcorder's burner or a similar device to dub the disc before proceeding with dubbing on this unit. For more details, refer to "Importing Data from a BD/DVD to the HDD" (A page 30) .

•When importing videos from a USB-connected camcorder, data reading from the internal memory of the camcorder may fail. If both the camcorder’s internal memory and SD card are available, the SD card may be detected first. To prevent this from occurring, remove the SD card before reading data from the internal memory.

OPreparations

1Connect the USB device to this unit using a USB cable

HDD	REC	BV	REC	SD
REC	INPUT	MIDIA SELECT		ONE TOUCH
MODE	SELECT	HDD	BD/SD	DUBBING

HDV/DV IN

Memo:

•After connecting the USB cable, turn on the camera and switch the mode of the camera.

(Choose "Connect to a computer" or a similar option. For details refer to the camera’s instruction manual.)

•“USB RDY” appears on the display window of the unit when an USB device is recognized.

2Press the [DUBBING] button on the remote control unit

• The importing screen appears.

56'2
5'.'%6+/2146&7$$+0)
	61*&&					61&8&
	75$						8 &'1
	5&					&+5%5&	2 %674'
	&+5%					&+5%%12;
	*&8&8			*&&			&+5%
		%#0%'.				0':6
			':+6	5'.'%6	1-
		&7$$+0)		126+10	4'6740

3Select "USBhHDD" in the importing screen, and press the [OK] button

•A check mark is added to the "USBhHDD" item.

4 Select “NEXT”, and press the [OK] button

•The import selection screen appears.

Full import

1Select “FULL IMPORT” in the import selection screen, and press the [OK] button

•A check mark is added to the “FULL IMPORT” item.

2 Select “START”, and press the [OK] button

56'2
5'.'%66*'/'6*1&1(+/2146
		75$		*&&
	(7..+/			5'.6+6.' 8+&'1
5'.6+6.' 2+%14674'
	%#0%'.	5'.'%6 $#%-	1-		56#46
	':+6
	&7$$+0)	126+10	4'6740

33