Tascam BD-R2000 owner manual Importing Data from an i.LINK-compatible Device to the HDD

Dubbing/Importing

Importing Data from an i.LINK-compatible Device to the HDD

Data on devices connected to the i.LINK terminal can be imported to the HDD as follows.

•Video formats that can be imported:

DV and HDV content

Memo:

•Only titles that are not copyright-protected can be imported.

•Devices that have in-built copyright protection such as

D-VHS and digital tuners cannot be connected. This unit only allows import from tape media.

•Importing will not be performed if no tape has been inserted into the HDV/DV camera.

•Importing will be cancelled when the mode is changed from

HDV to DV or vice versa.

•For camcorders that support both HDV and DV recording, use only one of the modes for recording and playback.

•There is no support for editing using a connected PC.

•Only one i.LINK device can be connected to this unit at a time.

•When importing DV contents with shooting date/time information, the date/time information at the beginning of the contents will be taken as the shooting date/time information. For HDV contents or DV contents without shooting date/time information, the importing date/time will be taken as the shooting date/time information.

Note:

•Turn off the power for this unit and the connecting device when connecting using an i.LINK compatible device.

•Do not unplug the i.LINK cable while importing to the HDD is in progress. Doing so may result in loss or damage of the titles.

OPreparations

1Connect the device (camera, etc.) to this unit using an i.LINK cable

HDD	REC	BV	REC	SD
REC	INPUT	MIDIA SELECT		ONE TOUCH
MODE	SELECT	HDD	BD/SD	DUBBING

HDV/DV IN

Memo:

•After the device (camera, etc.) has been connected using an i.Link cable, turn on the power of the device and switch it to playback mode. (refer to the device's (camera, etc.) instruction manual for more details.)

•“HDV/DV RDY” appears on the display window of the unit when an iLINK device is recognized.

2Press the [DUBBING] button on the remote control unit

• The importing screen appears.

56'2
5'.'%6+/2146&7$$+0)
	61*&&					61&8&
	75$						8 &'1
	5&					&+5%5&	2 %674'
	&+5%					&+5%%12;
	*&8&8			*&&			&+5%
		%#0%'.				0':6
			':+6	5'.'%6	1-
		&7$$+0)		126+10	4'6740

3Select "HDV/DVhHDD" in the importing screen, and press the [OK] button

•A check mark is added to the "HDV/DVhHDD" item.

4 Select “NEXT”, and press the [OK] button

•The import selection screen appears.

Imports data from the beginning

You can import videos from the beginning till the end as follows. If the current position is halfway through the tape, import after rewinding the tape to the beginning.

1Select “IMPORT FROM BEGINNING”, and press the [OK] button

•A check mark is added to the “IMPORT FROM

BEGINNING” item.

2Select “NEXT”, and press the [OK] button

+/2146(41/$')+00+0)				+/2146(41/%744'06215+6+10
56'2
5'.'%66*'/'6*1&1(+/2146
		*&8&8			*&&
	%#0%'.	5'.'%6 $#%-	1-			0':6
	':+6
	&7$$+0)	126+10	4'6740

• A recording mode selection screen appears.

3Select “RECORDING MODE”, press the [OK] button, and select from the pop-up menu

37