Tascam BD-R2000 owner manual Monitor Type, Hdmi Connection

Settings Menu

Connection
		%100'%6+10
0	;2'
%1*&/2+0'%'%0'%6+10				1((K
8+&'614+02761762765'6 +0)				8+&'1
':+6		5'.'%6	1-
5'672			4'6740

OMONITOR TYPE

For setting the aspect ratio according to the connected monitor.

Setting Values	Description
16:9	Set to this value when connected to
	monitors with 16:9 aspect ratio.
16:9FULL	Choose this setting when a 16:9 monitor
	is connected to display images without
	the black borders.
4:3	Set to this value when connecting to
PAN&SCAN	monitors with an aspect ratio of 4:3.
	Plays back videos with the left and right
	edges trimmed off.
4:3	Set to this value when connecting to
LETTERBOX	monitors with an aspect ratio of 4:3.
	Plays back videos with a black band at
	the upper and lower ends.

OHDMI CONNECTION

• VIDEO PRIORITY MODE

Setting Values	Description
COMPONENT	Set to this value for output at a
	resolution of “480p” or higher from the
	[COMPONENT VIDEO OUT] terminal.
HDMI	Set to this value when priority is to
	be given to the “HDMI OUTPUT
	RESOLUTION” setting.

Memo:

•During data output from the [HDMI] terminal, setting to “COMPONENT” automatically outputs data in the “COMPONENT OUTPUT” setting. Setting to “HDMI” outputs data in the “HDMI OUTPUT RESOLUTION” setting.

•During data output from the [HDMI] and [COMPONENT

VIDEO OUT] terminals, setting to “COMPONENT” automatically outputs data in the “COMPONENT OUTPUT” setting. Setting to “HDMI” outputs data at the “480i” resolution from the [COMPONENT VIDEO OUT] terminal.

•When there is no output from the [HDMI] terminal, data is automatically output in the “COMPONENT OUTPUT” setting from the [COMPONENT VIDEO OUT] terminal.

• HDMI OUTPUT RESOLUTION

Setting	Description
Values
AUTO	Automatically selects an appropriate
	resolution according to the connected
	device.
480p	Fixes the resolution at 480p.
1080i	Fixes the resolution at 1080i.
720p	Fixes the resolution at 720p.
1080p	Fixes the resolution at 1080p.

Memo:

•When the resolution is set to “720p”, videos are output at

“1080i” other than those recorded at “720p” even though “720p” is shown on the display.

•Depending on the conditions (monitor type 16:9,resolution

“720p” and above, aspect 4:3), some of the OSD display of the component output may be cut off. In this case, set “VIDEO PRIORITY MODE” to “COMPONENT”.

OSD of the [VIDEO OUT]/[S-VIDEO OUT] terminals may be cut off with the above conditions even when “COMPONENT” is selected. In this case, set the component resolution to “480p” or below, or set the monitor type to other settings except 16:9.

•BD-VIDEO 24p OUT

Setting	Description
Values
OFF	Outputs in the resolution set by “HDMI
	OUTPUT RESOLUTION”.
ON	Outputs 24p elements at 24p.

Memo:

•24p playback is possible for commercially available BD-

Videos or BDMVs that are recorded in 24p. Content other than BDMVs that is dubbed or recorded on this unit at 24p, as well as 24p content on SD cards are played back at 60p or 60i.

•This is applicable for BD-ROM and DVD-Video titles.

This is available when connected to a 24p compatible monitor.

•Elements other than 24p ones are output at 60p.

•No video images will be output from the video, S-video and component outputs when the HDMI output resolution is at 1080/24p.

80