Tascam BD-R2000 Name and Function, Remote control codes, Change batteries for the remote control

Getting Started

Name and Function of
		Remote control codes
Parts (Continued)	control, you can prevent two recorders from operating
	By setting a remote control code for the unit and remote
	simultaneously using the remote control for this unit.
G [ N ]
	(the setting for the unit and remote control at time of purchase
Fast forwards the video and starts slow playback.
	is “REMOTE CONTROL 3”.)
H [ I ]
	Memo:
Plays the video.
	•		Changing the remote control code for the remote control
I [ W ]
			before the unit’s remote control code is changed will cause
Pauses the video that is currently playing.			the unit to be inoperable. Change the unit’s remote control
J [ O ]			code first when changing remote control codes.
Stops playback/recording.	O		Changing the remote control code for the
K [MARK]
Adds a chapter mark during playback or recording. Select			unit
multiple titles from the playback navigation screen or other	1		Press the [SET UP] button on the remote control
screens.			to display the “SETUP” menu
L [PB MODE]	2		Change the “REMOTE CONTROL CODE” option
Display the playback settings screen.
			in the “SETUP” menu
M [ANGLE]	Memo:
Switches the camera angle for playback.
	•		For more details, refer to “REMOTE CONTROL CODE” (A
N [SET UP]
			page 75).
Displays the settings menu screen.
			Changing the remote control code for the
O [SUB TITLE]	O
Switches the playback subtitle.			remote control
P [INFORMATION CORRECT]	1		Press and hold the [OPTIONS] button on the
Displays the information editing screen.
			remote control
	2 Press either of the [1], [2], [3] or [4] buttons
Change batteries for the remote control
	•		Press the number button that is equivalent to the remote
• If the operable distance of the remote control unit becomes			control code you desire.
shorter, this means that the batteries are running out.	3		Press the [OK] button
When this occurs, replace the batteries with new ones.	•		Press the [OK] button to change the remote control code.

4 Release the [OPTIONS] button on the remote control

Memo:

• If the remote control code is different from the unit, the remote control code for the unit will be displayed on the display window.

Examples: REMOTE CONTROL 3

Batteries

•Insert the batteries correctly according to the + and - signs. Insert the - side of the battery first.

•If an error occurs while using the remote control unit, remove the batteries, wait for about five minutes, and operate the remote control unit again after re-inserting the batteries.

Battery life : Approximately 6 months (depending on the frequency of use)

16