Tascam BD-R2000 owner manual Copying the Entire Disc, Select DISChDISC, and press the OK button

Page 46

Dubbing/Importing

Copying the Entire Disc

Copying the entire disc allows all content on a BD (BDMV) or DVD (AVCHD, DVD-Video) to be copied onto another disc.

Note:

Content cannot be copied to a formatted BD-R or DVD-R disc. Make use of an unformatted disc.

Use a DVD-R/-RW instead of a BD-R/-RE or DVD when the source disc is a BD disc.

The disc to be copied onto will be formatted when copy is performed. Check that the disc has not been used before or if it is ok to delete data on the disc when using a BD-RE or a DVD-RW.

In the case of BD, volume labels are not copied.

If an unsupported disc is set, “UNABLE TO IMPORT

FROM DISC” or “UNABLE TO DUB ONTO DISC INSERT ANOTHER DISC” will be displayed on the monitor. Use a disc that is supported by this unit.

For details on discs that are supported by this unit, refer to "Discs that enable both dubbing and playback" (A page 10) and "Discs that enable playback only" (A page 10) .

1Press the [DUBBING] button on the remote control unit

• The Dubbing screen appears.

56'2

 

 

 

 

 

 

 

 

5'.'%6+/2146&7$$+0)

 

 

 

 

 

61*&&

 

 

61&8&

 

 

75$

 

 

 

 

 

 

8 &'1

 

5&

 

 

 

 

&+5%

5&

2 %674'

 

&+5%

 

 

 

 

 

 

 

 

 

 

 

 

&+5%%12;

 

 

*&8&8

 

*&&

 

 

 

&+5%

 

 

%#0%'.

 

 

 

0':6

 

 

 

 

':+6

5'.'%6

1-

 

 

 

 

 

 

 

 

 

 

 

 

&7$$+0)

126+10

4'6740

 

 

 

2Select “DISChDISC”, and press the [OK] button

• A menu screen for copying the entire disc appears.

Memo:

During copy of the entire disc, data is temporarily copied to the internal HDD.

Only discs that are not copyright-protected can be copied.

3Set the number of discs to copy using the [ J / K ] buttons

• You can specify up to a maximum of 10 discs.

 

07/$'41(%12+'5

 

 

2

 

52'%+(;6*'07/$'41(%12+'5#0&5'.'%6 ':'%76'

24'82) 0':62)

%#0%'.

5'.'%6

$#%-

1-

 

0':6

':+6

 

 

 

 

 

&7$$+0)

126+10

 

4'6740

 

 

 

 

 

 

 

4Select “NEXT”, and press the [OK] button

• The disc tray will open automatically.

5Set the source BD or DVD on the disc tray

6Select “START”, and press the [OK] button

6'2

 

 

 

 

 

5'.'%656#4661$')+0&7$$+0)

 

 

 

 

&+5%%12;

 

 

 

+05'466*'&+5%61$'%12+'&

 

 

%#0%'.

5'.'%6 $#%-

1-

56#46

 

':+6

 

 

 

 

&7$$+0)

 

126+10

4'6740

 

 

 

 

 

The disc tray will close automatically. The source BD or

DVD will be recognized, and copying to the internal HDD will proceed.

The disc tray will open automatically after copying has finished and “READY TO COPY NOW. INSERT THE DISC

FOR COPYING” will be displayed on the monitor.

Memo:

Confirm the insufficient space on the internal HDD when the copy interrupts.

7Set a BD or DVD to copy on the disc tray

8Select “START”, and press the [OK] button

56'2

 

 

 

 

5'.'%656#4661$')+0&7$$+0)

 

 

 

&+5%%12;

 

 

4'#&;61%12;019+05'466*'&+5%(14%12;+0)

 

%#0%'.

5'.'%6 $#%-

1-

56#46

 

':+6

 

 

 

&7$$+0)

126+10

4'6740

 

The disc tray will close automatically. BD or DVD will be recognized, and the contents that were copied to the HDD will be copied to the disc.

Memo:

The copy operation will not be performed when the remaining disc memory is not sufficient.

46

Image 46
Contents BD-R2000 Safety Precaution Dear CustomerImportant Safety Instructions Disclaimer of Liability Contents Key Features How to Read this ManualHandling precautions Other Precautionary NotesStored video content and compensation Copyright protectionSD Cards Precautions for handling SD and Sdhc cardsHard Disk Drive HDD Hard disk drive HDDOn-screen Displays DiscsDiscs that enable playback only Discs that enable both dubbing and playbackDiscs that are not supported Precautions on the Use of Discs Use Precautions for placementPrecautions When Mounting Rack Rack Mounting NotesFront panel Name and Function PartsSD Slot Hello Display windowRear panel ReadingGetting Started Remote control Deletes a title or charactersName and Function Remote control codesChange batteries for the remote control BatteriesConnecting using a Hdmi cable Connecting a MonitorConnecting using an S-video cable Connecting using a component video cableConnecting a video camera Connecting a Video Deck or Other EquipmentConnecting an Amplifier Connecting an audio amplifierConnecting a wired remote control Connecting External DevicesConnecting the Power Supply Connecting using a RS-232C cablePress the SET UP button on the remote control unit Setting and Displaying Date/TimeSetting the date/time Select Clock SET, and press the OK buttonSelect the date display style Changing the date display styleSelect Date DISPLAY, and press the OK button After selecting, press the OK buttonYou can specify the display style of the time as follows Changing the time display styleSelect the time display style Time display style will be savedOther options for importing data into Dubbing/ImportingDubbing from the HDD to a BD/DVD HDDDubbing the video data from the HDD Dubbing/Importing Dubbing chartDubbing the picture data from the HDD BD format chart Format chartDVD format chart FormattingSelect Stop and press the OK button Cancel formattingMemo Press the Option button while formatting Confirmation screen to stop formatting appearsSelect Format from SD Card Dubbing/Importing Formatting an SD CardInsert the SD card to be formatted into the SD Slot Select YES, and press the OK buttonFR mode Maximum recording time for each recording modeDR mode Recording ModesSystem checks the device connection Procedure for one-touch importingPress the ONE Touch Dubbing button on the unit System detects the titles to importFull import Importing Data from a BDDVD to the HDD PreparationsSelect Recording MODE, and press the OK button Specify a titleSelect START, and press the OK button Create an import title listTo cancel importing while it is in progress Canceling importingTo cancel importing before it starts Importing Data from a BD/ DVD to the HDDImporting Data from a USB- compatible Device to Connect the USB device to this unit using a USB cablePress the Dubbing button on the remote control unit Check mark is added to the USBhHDD itemImporting Data from a USB- compatible Device to the HDD Insert the SD Sdhc card into the SD Slot Memo Importing Data from an SD Card to the HDDCheck mark is added to the SDhHDD item %66*/6*1&1+/2146 Imports data from the beginning Recording mode selection screen appearsImporting Data from an i.LINK-compatible Device to the HDD Select Import from BEGINNING, and press the OK buttonSelect XP, SP, LP, or EP from the Recording Mode option Cancel dubbingImports data from current position Preparation Dubbing a Title from the HDD to a BD/DVDDubbing titles Create a dubbing title list Select from Default BackgroundSelect a background image for the disc menu TOP Menu Cancel dubbingSet the operations for finalize Select REPEAT, and choose either OFF or onBefore dubbing Dubbing Still Images from the HDDDubbing still images Dubbing from the Playback Navigation screen Select the still images to dub, and press the Option buttonFinalizing Setting the top menu itemsEnabling Playback on Other Devices Finalizing NoneUnfinalizing a disc To unfinalize a discCopying the Entire Disc Set the number of discs to copy using the J / K buttonsSelect DISChDISC, and press the OK button Recordable Media Recording Using External InputsComplete the entire disc copying Maximum Continuous Recording TimeDisplaying the Playback Navigation screen About Playing Back Using Playback NavigationDisplay Marks on the Playback Navigation Screen Operating Playback NavigationDisplaying a group/folder Switching between thumbnail and list displaysDisplaying the Option menu Option menu list Select an operation option, and press the OK buttonButton Video Playback OperationFrequently used button operations S buttonUseful button operations Playing Video Discs Created Using a PC Playing a disc when Auto Play is enabledPlaying a disc when Auto Play is disabled Playing Videos on a BDPlaying Videos on a SD Card Playing Videos on the HDDPlaying titles stored on the HDD Playing still images Enabled button operations during still image playbackPlaying Still Images Jpeg T buttonDisplaying the playback settings menu Changing Playback SettingsPlayback Settings Menu Audio/subtitle settingsPicture Quality Playing Back Video settingsDetail Setting Digital Noise ReductionBefore editing Media chartEditing Editable items for different mediaCharacter List Entering characters Entering CharactersCharacter input screen Characters entered appear on the input windowGrouping GroupingUngrouping Excluding from a group Select do not GROUP, and press the OK buttonSelect Edit INFO, and press the OK button Changing the Title/Group NameDeleting a Title/Group Modify the title/group nameSelect YES or PROTECT, and press the OK button Turning On Title/Group ProtectionSelect PROTECT, and press the OK button Selected titles/groups are now protectedSelect UNPROTECT, and press the OK button Turning Off Title/Group ProtectionProtection of the selected titles/groups is now turned off Creating a Playlist Creating a PlaylistEditing the playlist Select CHANGE, and press the OK button Editing a ThumbnailSelect Modify THUMBNAIL, and press the OK button Select CONFIRM, and press the OK buttonChapter edit functions Editing a ChapterEditing a chapter Chapter options Select DIVIDE, and press the OK button DividingDividing Select EXECUTE, and press the OK buttonSelect Delete SCENE, and press the OK button Delete ScenesDelete Scenes Select DIVIDE, and press the OK buttonConfirmation screen for performing scene delete appears Repeat Steps 1 to 4 to specify the sections to deleteScene deletion starts Changing the Disc Name Changing the Shooting Date/TimeSelect ENTER, and press the OK button Mode conversionSelect Change Shooting DATE/TIME, and press the OK button Setting Menu List Changing Settings of this UnitDisplaying the Settings Menu Clock SET/DISPLAY Auto Power OFFRemote Control Code Panel Display BrightnessBD-/DVD-VIDEO PB Setting Playback SettingDefault Setting Quick StartupResume Still ModeXP Mode Recording Audio Seamless PlaybackDown MIX Dynamic Range ControlDigital OUT On Screen Guide DV in Audio SettingBD MIX Sound Blue BackMonitor Type Hdmi ConnectionHDMI-CEC Video Input SettingComponent Output Locking the Disc Tray Turning on the Mode LockLast Function Memory RS-232C Interface Command TableSpecifications GNDOthers Command Operation CommandsOthers 80-8F Chapter Search 1st Byte 2nd Byte 3rd ByteOPEN/CLOSE TEN KEY KEY Z KEY # REC Mode XP/SP/LPMenu ProgressiveNavigation L1 Y/C Input Select Color KEY Blue Color KEY REDInstant Replay Edit Color KEY Green Color KEY Yellow L1 Composite InputOthers Subtitle Selection Language Code List aB8 Subtitle Selection 1st 2nd Byte Others Audio Language Selection B8 Audio Language Selection 1st 2nd ByteSystem Commands Others Response CommandsSense Subtitle selection Standby Search Speed VTR Status Sense HDD HDD/BD/SDPause DVD DVD-RAM BD-ROM DVD-RW BD-RE DVD+R Still SEARCH1 SEARCH2 SEARCH3 SEARCH4 SEARCH5Pause Disc Type DVD+RWLanguage Code List Others Country Code List Others Hdmi Consumer Electronics Control Using the Hdmi Consumer Electronics Control HdmiCreating a Seamless BD Hdmi Consumer Electronics Control operationsTroubleshooting 100 Accessories Specifications101 102 IndexSoftware License Attached to the Product 103Important Notice Concerning the Software GNU General Public License Version 2, June104 This License applies to any program or other work whichNo Warranty 105GNU Lesser General Public License Version 2.1, February 106Copyright C 1989, 1991 Free Software Foundation, Inc 107 108 109 110 111 BD-R2000