Tascam BD-R2000 owner manual Hard Disk Drive HDD, SD Cards, Hard disk drive HDD, BD video data

Getting Started

Hard Disk Drive (HDD)

Hard disk drive (HDD)

The HDD rotates at a high speed whenever the power is turned "On".

Pay particular attention to the following precautions when using this unit.

Warning

•Do not subject it to vibration or strong impact

Subjecting this unit to excessive impact may result in loss of recorded data and even damage of the HDD.

•Do not remove the power plug when this unit is running

Shutting down the power when the HDD is running may result in data loss and even damage of the HDD. Make sure that the power plug is removed only after turning off the power.

(Wait for the "GOODBYE" message on the display window to disappear first)

SD Cards

Precautions for handling SD and SDHC cards

Note:

•The disc operation display icon appears blinking and

“READING” is displayed on the display window when the SD card is being accessed (such as during dubbing, playback, or formatting). When access to the SD card is in progress, do not remove the card or the power plug. Doing so may cause the SD card to become unusable.

If the SD card is not usable, reformat the card. If the problem persists even after reformatting, use a new SD card.

•Do not use or store the card at a place that is subject to static or electrical noise.

•Inserting the SD card incorrectly may cause this unit or the card to malfunction.

•Our company will not be liable for any damage or loss of the stored data due to accidents. (Be sure to back up the data.)

•Use the card according to the prescribed conditions. Do not use it at the following locations.

•Places that are exposed to direct sunlight

•Places near heat-generating equipment

•Inside a car that is under the sun with the windows tightly shut

•Places that are subject to high humidity and corrosion

•Do not bend or drop the card, or subject it to strong impact or vibration.

•Do not expose the card to water.

•Do not place near devices that emit strong magnetic or radio waves.

•Do not touch the metal part of the card.

Memo:

To dispose a card after erasing all data inside, it is recommended that this be done using a commercially available data deletion software, or by destroying the card physically, such as with a hammer. Formatting or deletion of data using this unit only changes the file administration information, and does not erase the data completely.

BD video data

You can erase BD Video data from the SD card as follows.

1Insert the SD card which has BD video data stored on it, into the [SD SLOT]

Memo:

•The BD video data cannot be erased if the SD card is write- protected. In this case, turn off the write-protect lock before inserting the SD card.

2Press the [MEDIA MANAGE] button on the remote control unit

3Select “BD-VIDEO DATA ERASE” from “SD CARD”

•The confirmation screen for erasing the BD video data is displayed.

4Select “ERASE”, and press the [OK] button

• The BD video data will be erased.

8