Datavideo MP-6000 Mk2 manual Quick Start Guide

Page 16

Quick Start Guide:

As the heading suggests, this is the quick start section. If you require more detailed operating instructions please go to page 18.

Step 1: Turn on power to the MP-6000, the source and the monitor.

Step 2: Press the “POWER” button, to turn on the MP-6000. The word “MP-6000” and then “BOOT” will appear on the display window. After a couple seconds, it will present “NO Disc” that means

the tray is empty. Please place a disc on the tray.

Note: The upper right window on the TV screen will show two lines of data. One is the status of the unit, the other one is the input format setting.

Step 3: Press the “EJECT” button once, the tray will come out, the word “OPEN” appears in the window. Please put the DVD+R or RW disc with the printing surface up, and then press the

“EJECT” button again. The tray will return into the MP-6000.

Step 4: The word ' Reading ' appears on the screen, in the upper right corner, this means the MP 6000 is reading the disc. If the disc contains previous recordings, it will be detected during the read process. If there is a recording present you can press the “PLAY“ key and play out the program immediately.

Step 5: If it is a blank/brand-new disc, the MP-6000 will start the formatting process immediately. A window will appear saying “FORMATTING.” The entire process will take approximately 20 second.

Note: It’s necessary to format the disc before you start recording.

Step 6: Press the “INPUT“ button to choose the input signal source.

Step 7: Press the “QUALITY” button on the panel to choose HQ / SP / LP / EP / SLP record quality. Once this is set you can start recording.

Step 8: Before you start to record, you can adjust video input source quality by using the color processor of the MP-6000.

a. Press the “MENU” button once, choose '”1.COLOR CORRECTION”, then press the “ENTER” button. Use the Up and Down arrow buttons to move to different categories.

zBrightness

zContrast

15

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Page Table of contents Page Page Page What’s in the Package IntroductionFeatures Functions Front Panel Color Correction System Setup Page Balanced Audio Output Installation Page Page Quick Start Guide Or component. It does not work on a DV input signal Erase the entire Title Track in DVD+RW disc Powering Up Setting Up ConnectingOn-Screen Display LCD Display DigitalSetting the Time & Date Page Page Setting the Video Input Digital = DV IeeeRecording a Disc Setting the Record QualityInserting a Disc DVD+RW Recording from an Analogue Source Recording from a DV IEEE1394 Digital Source Reviewing a Recording Finalizing a DVD+R Disc OrthenLCD Finalizing a DVD+RW Disc Make Compatible Editing a Title Editing a Title DescriptionPage Editing a Title Icon Page Color Correction Audio Level Adjustment Setting the Video Standard PAL/NTSC GPI FunctionDIP switch Additional Features of DVD+RW Discs Formatting a New DVD+RW DiscErasing a DVD+RW Disc Erasing the Last Title from a DVD+RW Disc Page Factory Reset Return to default Page RS 232 Information Specifications DV InputService and Support Datavideo UK Limited
Top Page Image Contents