Datavideo MP-6000 Mk2 manual Audio Level Adjustment

Page 38

To access other options press the Down Arrow button to select

Contrast, Color and Tint (NTSC only)

The procedure for setting Contrast, Color and Tint (NTSC only) is the same as for Brightness.

Once all the adjustments are correct, press the Menu button to exit the Color Correction menu and return to the General Display

These color correction settings will be stored as your default settings for the unit.

If you wish to return to the factory default at any point, follow the above procedure but highlight DEFAULT and press the Enter button, then highlight SAVE and press the Enter button again.

Audio Level Adjustment

This setting applies to analogue inputs only; it is not available from a DV (Digital) source.

It is important to make sure that the audio level from your input source is not too high, as this will cause distortion on the finished disc. The MP 6000 has a built in audio level control that allows you to optimize the audio level prior to recording.

The LED’s above the adjustment knob will light up to show the volume of the incoming audio. It is ideal to adjust the knob so that the red LED occasionally lights up, when then is a particularly loud noise, but it is not illuminated at any other time.

37

Page 37 Page 39
Image 38
Page 37 Page 39
Contents Page Table of contents Page Page Page What’s in the Package IntroductionFeatures Functions Front Panel Color Correction System Setup Page Balanced Audio Output Installation Page Page Quick Start Guide Or component. It does not work on a DV input signal Erase the entire Title Track in DVD+RW disc On-Screen Display Setting Up ConnectingPowering Up LCD Display DigitalSetting the Time & Date Page Page Setting the Video Input Digital = DV IeeeInserting a Disc Setting the Record QualityRecording a Disc DVD+RW Recording from an Analogue Source Recording from a DV IEEE1394 Digital Source Reviewing a Recording Finalizing a DVD+R Disc OrthenLCD Finalizing a DVD+RW Disc Make Compatible Editing a Title Editing a Title DescriptionPage Editing a Title Icon Page Color Correction Audio Level Adjustment Setting the Video Standard PAL/NTSC GPI FunctionDIP switch Additional Features of DVD+RW Discs Formatting a New DVD+RW DiscErasing a DVD+RW Disc Erasing the Last Title from a DVD+RW Disc Page Factory Reset Return to default Page RS 232 Information Specifications DV InputService and Support Datavideo UK Limited
Top Page Image Contents