Datavideo MP-6000 Mk2 manual RS 232 Information

Page 47

Use the Up, Down Left and Right Arrow buttons to navigate and set the date and time

Then use the Right Arrow button to highlight save, and press the Enter button to confirm. The screen will go black for a few seconds and then the MP 6000 is ready to go.

RS 232 Information

The MP 6000 can be fully controlled via RS 232. The RS 232 port situated on the rear of the MP 6000 uses standard RS 232 wiring. Full information on the control protocol is available from your local Datavideo office. Please read the chapter on GPI functions, as this will guide you regarding which Dip switch settings to use.

46

Image 47

Contents Page Table of contents Page Page Page Introduction What’s in the PackageFeatures Functions Front Panel Color Correction System Setup Page Balanced Audio Output Installation Page Page Quick Start Guide Or component. It does not work on a DV input signal Erase the entire Title Track in DVD+RW disc On-Screen Display Setting Up ConnectingPowering Up Digital LCD DisplaySetting the Time & Date Page Page Digital = DV Ieee Setting the Video InputInserting a Disc Setting the Record QualityRecording a Disc DVD+RW Recording from an Analogue Source Recording from a DV IEEE1394 Digital Source Reviewing a Recording Orthen Finalizing a DVD+R DiscLCD Finalizing a DVD+RW Disc Make Compatible Editing a Title Description Editing a TitlePage Editing a Title Icon Page Color Correction Audio Level Adjustment GPI Function Setting the Video Standard PAL/NTSCDIP switch Formatting a New DVD+RW Disc Additional Features of DVD+RW DiscsErasing a DVD+RW Disc Erasing the Last Title from a DVD+RW Disc Page Factory Reset Return to default Page RS 232 Information DV Input SpecificationsDatavideo UK Limited Service and Support