Datavideo MP-6000 Mk2 manual Setting the Record Quality, Recording a Disc, Inserting a Disc

Page 25

Setting the Record Quality

The MP 6000 has five Recording Quality options HQ, SP, LP, EP, SLP. The Selected option is displayed in

two ways.

 

LCD Display

On-Screen for five seconds

We will concentrate on the LCD Display

Press the Quality button to toggle through the Record Quality options.

As you select each different Record Quality option you will notice that the on-screen display indicates how many minutes of record time are available at the selected quality, this information bar is displayed for five seconds.

The figures above are typical for an empty DVD+R disc.

Recording a Disc

With the Video Input selected and the Record Quality selected you are now ready to make a recording.

Inserting a Disc

It is most important that you handle DVD+R / RW discs with care. Do not touch the underside of the disc, fingerprints, smudges and scratches are likely to make the recording fail. Discs should be stored in a cool, dry place out of direct sunlight; they should not be exposed to extremes of temperature.

DVD+R

Press the Eject button, the message OPEN will be displayed on the LCD display, and the disc tray will open.

Place a blank DVD+R disc on the disc tray; label/printed side up.

Press the Eject button again, so that the tray retracts, and the CLOSE message appears.

After a few seconds the message will change to READING, and after a few more seconds it will return to the general display.

24

Image 25
Contents Page Table of contents Page Page Page Introduction What’s in the PackageFeatures Functions Front Panel Color Correction System Setup Page Balanced Audio Output Installation Page Page Quick Start Guide Or component. It does not work on a DV input signal Erase the entire Title Track in DVD+RW disc Powering Up Setting Up ConnectingOn-Screen Display Digital LCD DisplaySetting the Time & Date Page Page Digital = DV Ieee Setting the Video InputRecording a Disc Setting the Record QualityInserting a Disc DVD+RW Recording from an Analogue Source Recording from a DV IEEE1394 Digital Source Reviewing a Recording Orthen Finalizing a DVD+R DiscLCD Finalizing a DVD+RW Disc Make Compatible Editing a Title Description Editing a TitlePage Editing a Title Icon Page Color Correction Audio Level Adjustment GPI Function Setting the Video Standard PAL/NTSCDIP switch Formatting a New DVD+RW Disc Additional Features of DVD+RW DiscsErasing a DVD+RW Disc Erasing the Last Title from a DVD+RW Disc Page Factory Reset Return to default Page RS 232 Information DV Input SpecificationsDatavideo UK Limited Service and Support