Datavideo MP-6000 Mk2 manual Recording from an Analogue Source

Page 27

Recording from an Analogue Source

If you are recording from a tape start the tape playing, the video image should appear on the TV monitor connected to the MP 6000 output. If you are recording a live image from a camera you should be able to see the image from the camera on the TV monitor connected to the MP 6000 output.

If necessary you can adjust the Brightness, Contrast, Color and Tint (NTSC Only) of the video image, this is covered in the chapter “Color Correction”. You also have an Audio Input setting that can adjust the volume of the audio prior to recording, see the chapter “Audio Level Adjustment” for more details.

We will first look at recording from an analogue video input (Composite Video, S-Video, Y U V); recording from DV is a little different, so we will look at that, in more detail in another chapter.

To start recording press and hold the Rec button, then while still holding it down press the Play button

+

The LCD should go to the Record Display and On-Screen there should be a Rec indicator, such as this:

LCD Display

On-Screen Indicator – In upper left corner of screen

To stop recording press, the Stop button.

The LCD will return to general display and the On-Screen display will show the Stop Message.

LCD Display

On-Screen Display

+

The first track of the disc is now completed. You can record more tracks by following the same routine; up to 99 tracks can be recorded on a disc.

26

Page 26 Page 28
Image 27
Page 26 Page 28
Contents Page Table of contents Page Page Page Introduction What’s in the PackageFeatures Functions Front Panel Color Correction System Setup Page Balanced Audio Output Installation Page Page Quick Start Guide Or component. It does not work on a DV input signal Erase the entire Title Track in DVD+RW disc Setting Up Connecting Powering UpOn-Screen Display Digital LCD DisplaySetting the Time & Date Page Page Digital = DV Ieee Setting the Video InputSetting the Record Quality Recording a DiscInserting a Disc DVD+RW Recording from an Analogue Source Recording from a DV IEEE1394 Digital Source Reviewing a Recording Orthen Finalizing a DVD+R DiscLCD Finalizing a DVD+RW Disc Make Compatible Editing a Title Description Editing a TitlePage Editing a Title Icon Page Color Correction Audio Level Adjustment GPI Function Setting the Video Standard PAL/NTSCDIP switch Formatting a New DVD+RW Disc Additional Features of DVD+RW DiscsErasing a DVD+RW Disc Erasing the Last Title from a DVD+RW Disc Page Factory Reset Return to default Page RS 232 Information DV Input SpecificationsDatavideo UK Limited Service and Support
Top Page Image Contents