Datavideo MP-6000 Mk2 manual Color Correction

Page 37

Color Correction

If the image from the video source is in need of adjustment the MP 6000 has a built in video processor, it can adjust the Brightness, Contrast, Color Saturation and Tint (NTSC only). These settings are only available with analogue video signals, YUV, S-Video and Composite Video.

To call up the Video Processor Settings start with the LCD display on General Display. Have your video source playing, so that you can see the image on the TV monitor

Press the Menu button to bring up the Color Correction menu

Press the Enter button and the display will change to the

Brightness setting

To adjust the Brightness press the Enter button again. The LCD display will change and the Brightness adjustment will appear on the TV monitor.

LCD Display

On-Screen Adjustment

Use the Left and Right Arrow buttons to

A reduced value

adjust the Brightness – Left reduces the

 

brightness and Right increase the brightness

An increased value

Once the setting is correct press the Enter button

The LCD Display will change

SAVE should be flashing, press the Enter button and the new value is saved. If SAVE is not flashing use the Left Arrow button to highlight SAVE so that it is flashing, and then press the Enter button

Press the Enter button to save the new value. Once saved the

Menu will return to 1.Brightness

36

Page 36 Page 38
Image 37
Page 36 Page 38
Contents Page Table of contents Page Page Page Introduction What’s in the PackageFeatures Functions Front Panel Color Correction System Setup Page Balanced Audio Output Installation Page Page Quick Start Guide Or component. It does not work on a DV input signal Erase the entire Title Track in DVD+RW disc Powering Up Setting Up ConnectingOn-Screen Display Digital LCD DisplaySetting the Time & Date Page Page Digital = DV Ieee Setting the Video InputRecording a Disc Setting the Record QualityInserting a Disc DVD+RW Recording from an Analogue Source Recording from a DV IEEE1394 Digital Source Reviewing a Recording Orthen Finalizing a DVD+R DiscLCD Finalizing a DVD+RW Disc Make Compatible Editing a Title Description Editing a TitlePage Editing a Title Icon Page Color Correction Audio Level Adjustment GPI Function Setting the Video Standard PAL/NTSCDIP switch Formatting a New DVD+RW Disc Additional Features of DVD+RW DiscsErasing a DVD+RW Disc Erasing the Last Title from a DVD+RW Disc Page Factory Reset Return to default Page RS 232 Information DV Input SpecificationsDatavideo UK Limited Service and Support
Top Page Image Contents