Datavideo MP-6000 Mk2 manual Dvd+Rw

Page 26

DVD+RW

Press the Eject button, the message OPEN will be displayed on the LCD display, and the disc tray will open.

Place a DVD+RW disc on the disc tray; label/printed side up.

Press the Eject button again, so that the tray retracts, and the CLOSE message appears.

After a few seconds the message will change to READING, and after a few more seconds it will return to the general display.

If the disc has been used previously it will not be necessary to format it, the MP 6000 will check the disc and you can start recording immediately. If there are other tracks on the disc that you would like to erase please see the chapters, “Erasing a DVD+RW Disc” and “Erasing the Last Title from a DVD+RW Disc”.

25

Image 26

Contents Page Table of contents Page Page Page What’s in the Package IntroductionFeatures Functions Front Panel Color Correction System Setup Page Balanced Audio Output Installation Page Page Quick Start Guide Or component. It does not work on a DV input signal Erase the entire Title Track in DVD+RW disc On-Screen Display Setting Up ConnectingPowering Up LCD Display DigitalSetting the Time & Date Page Page Setting the Video Input Digital = DV IeeeInserting a Disc Setting the Record QualityRecording a Disc DVD+RW Recording from an Analogue Source Recording from a DV IEEE1394 Digital Source Reviewing a Recording Finalizing a DVD+R Disc OrthenLCD Finalizing a DVD+RW Disc Make Compatible Editing a Title Editing a Title DescriptionPage Editing a Title Icon Page Color Correction Audio Level Adjustment Setting the Video Standard PAL/NTSC GPI FunctionDIP switch Additional Features of DVD+RW Discs Formatting a New DVD+RW DiscErasing a DVD+RW Disc Erasing the Last Title from a DVD+RW Disc Page Factory Reset Return to default Page RS 232 Information Specifications DV InputService and Support Datavideo UK Limited