JVC E9770ED/1VMN manual Manual Tuning, To Select a Channel, To Skip a Preset Channel, 20 EN

Manual Tuning

Manually tune each channel.

1 In stop mode, press [SET UP].

“Easy Setting Menu” or “Advanced Setting Menu” will appear.

2 Select “Channel” using

[Cursor U / D], then press [ENTER].

Getting	3 Select “Manual Tuning” using
	[Cursor U / D], then press [ENTER].
Started
		Manual Tuning			VCR	DVD
			Position	P01
			Channel	12
			Decoder	OFF
			Skip	ON

4 Select “Position” using

[Cursor U / D], then press [ENTER].

5 Select the position number you wish to use using [the Number buttons] or [Cursor U / D], then press [RETURN].

You can select position numbers 01 to 99.

6 Select “Channel” using

[Cursor U / D], then press [ENTER].

7 Press [Cursor U / D] to start scanning.

•The tuner will begin to search up or down automatically. When a channel is found, the unit will stop searching and the picture will appear on the TV screen.

•You can select a desired channel number using [the Number buttons]. Refer to the following Channel Plan table and press the three digits to select the channel number.

(To select channel 4, press [0] first and then press [0] and [4]. Or press [4] and then “– – 4” appears and wait for 2 seconds.)

•If this is the channel you want, press [RETURN].

Channel Plan

Ch. Indication		TV Channel
02	- 12	E2 - E12
13	- 20	A - H (only ITALY)
21	- 69	E21 - E69
74	- 78	X, Y, Z, Z+1, Z+2
80 - 99, 100		S1 - S20, GAP
121	- 141	S21 - S41

This unit can receive the Hyper and Oscar frequency bands.

•If “Skip” is set to “ON,” select “Skip” using [Cursor U / D], then press [ENTER]. Select “OFF” using [Cursor U / D], then press [RETURN].

•If you want to decode scrambled signals, select “Decoder” using [Cursor U / D], then press [ENTER]. Select “ON” using [Cursor U / D], then press [RETURN].

•To store another channel, repeat steps 4 to 7.

8 After completion, press [SET UP] to exit.

To Select a Channel

Notes on using the Number buttons:

•Enter channel numbers as a two-digit number for the quickest result. For example, to select channel 6, press [0] and [6]. If you only press [6], channel 6 will be selected after 2 seconds. You can only select channels 1 to 99.

•You can select the external input mode “AV1,” “AV2” or “AV3.”

•To select “AV1,” press [0], [0], [1].

•To select “AV2,” press [0], [0], [2].

•To select “AV3,” press [0], [0], [3].

To Skip a Preset Channel

You can set the unit to skip channels you can no longer receive or seldom watch when you access channels using [PR +/-].

1 Follow steps 1 to 3 in “Manual Tuning.”

2 Select “Position” using

[Cursor U / D], then press [ENTER].

3 Select the position number you wish to skip using [the Number buttons] or [Cursor U / D], then press [RETURN].

4 Select “Skip” using [Cursor U / D], then press [ENTER].

5 Select “ON” using [Cursor U / D], then press [RETURN].

• To skip another channel, repeat steps 2 to 5.

6 Press [SET UP] to exit.

20 EN