JVC 0905TNH-FN-FN, E9770ED/1VMN Basic Recording, Setting Bilingual Recording Audio, Press DVD

5 Select “Stereo” or “Bilingual” using [Cursor U / D], then press [ENTER].

External input Audio DVD

Stereo

Bilingual

6 Press [SET UP] to exit.

Hint

•If you select “Stereo”:

The audio will be recorded as “stereo audio.”

•If you select “Bilingual”:

The audio will be recorded as “bilingual audio” (see next section for more detail).

Setting Bilingual Recording Audio

Video

DVD-RW DVD-R

You can select either “Main” or “Sub” audio to record a bilingual broadcast in Video mode.

1 In stop mode, press [SET UP].

2 Select “Advanced Setting Menu” using [Cursor U / D], then press [ENTER].

If it has already appeared, proceed to step 3.

3 Select “Recording” using

[Cursor U / D], then press [ENTER].

4 Select “Bilingual Recording Audio” using [Cursor U / D], then press [ENTER].

5 Select “Main” or “Sub” using [Cursor U / D], then press [ENTER].

	Bilingual Recording Audio	DVD
	Main
Sub

6 Press [SET UP] to exit.

Note

•If you are recording onto a VR mode disc, both “Main” and “Sub” will be recorded regardless of your setting here. And when you play back, you can choose either audio format or a combination of both as your playback audio.

Basic Recording

Video	VR
DVD-RW	DVD-RW DVD-R

Follow the steps below to record a TV programme.

1 Turn on the unit and insert a recordable disc.

Make sure that the TV input is set on the unit. This operation may take a few moments to complete.

2 Press [DVD].

3 Select the recording speed using [REC SPEED]. (See page 23.)

Make sure that the recording format is set to the desired mode. (See page 25.)

4 Select the desired channel to record using [PR +/-] or [the Number buttons].

5 Press [DVD REC I] to start recording.

The ● mark will be displayed for 5 seconds.

To pause the recording, press [PAUSE p]. Press [DVD REC I], or press [PAUSE p] again to restart the recording.

6 Press [STOP S] to stop the recording.

This operation may take a few moments to complete.

Hint

• You can change the channel while in the REC pause

mode.

Note

• Recording starts immediately and continues until the

disc is full or you stop recording.

• If the clock is not set, the date and time space next

to title names in the Original or Playlist will be blank.

• You cannot mix two formats on DVD-RW discs. If

you insert a previously recorded disc, changing the

recording format is not possible even if you change

it in the Setting menu.

• You cannot change the recording speed while in the

REC or REC pause mode.

• It is possible to record video only in the PAL system.

Recording

EN 27