JVC 0905TNH-FN-FN, E9770ED/1VMN Setting a Disc to Protect, To cancel the disc protect, DVD to VCR

Press [DUBBING].

DVD to VCR duplication will start.

10

Make sure to select a recording speed using [REC SPEED]. (See page 64.)

Rewind or fast forward the tape to the point where you want to start recording.

8 Press [DVD].

9 Press [DVD PLAY P] on the unit, and then press [PAUSE p] at the point you wish to start recording.

Press [VCR].

7

6 Press [SET UP] to exit the setting menu.

5

9 Press [VCR PLAY P] on the unit, and then press [PAUSE p] at the point you wish to start recording.

10 Press [DUBBING].

VCR to DVD duplication will start.

11 Press [STOP S] to stop the recording.

Note For VCR to DVD duplication:

•After starting VCR to DVD duplication, the picture may be distorted because of the auto tracking function. This is not a malfunction. Be advised to play back the tape until the picture is stabilized, then set the starting point which you wish to start recording, and start VCR to DVD duplication.

•If the playback sound mode of VCR is set to “STEREO,” “LEFT” or “RIGHT,” the sound mode upon dubbing is automatically switched to “STEREO.” If the playback sound mode is set to “MONO,” the sound mode upon dubbing is also “MONO.”

•If you set “External input Audio” to “Stereo,” the sound is recorded in “Stereo” (both Video mode and VR mode.)

•While in video mode, if you set “External input Audio” to “Bilingual,” “Bilingual Recording Audio” mode is recorded.

While in VR mode, if you set “External input Audio” to “Bilingual,” bilingual audio is recorded.

•The main and sub audio will be simultaneously recorded (VR mode.) You can select audio modes during playback.

DVD to VCR

Select “DVD→VCR” using

[Cursor U / D], then press [ENTER].

Dubbing Mode VCR DVD

VCR DVD

DVD VCR

11 Press [STOP S] to stop the recording.

Note

•When you turn off the unit after setting the Dubbing Mode to DVD→VCR, the setting will be set to VCR→DVD automatically.

•Dubbing Mode is available only if the tape or disc is not copy protected.

•You cannot change the output mode during VCR to DVD or DVD to VCR duplication.

Setting a Disc to Protect

VR

DVD-RW

To prevent accidental over-recording, editing or erasing of recordings, you can protect them using the Setting menu.

Insert a recordable disc.

1 In stop mode, press [SET UP].

“Easy Setting Menu” or “Advanced Setting Menu” will appear.

2 Select “Disc” using [Cursor U / D], then press [ENTER].

3 Select “Disc Protect OFF → ON” using [Cursor U / D], then press [ENTER].

4 Select “Yes” using [Cursor U / D], then press [ENTER].

The disc is protected.

Note

•The Disc Protect setting is available only when a disc recorded in VR mode is inserted.

•You can select only “Disc Protect ON → OFF” when a protected disc is inserted.

To cancel the disc protect:

•Select “Disc Protect ON → OFF” at step 3, then select “Yes.”

•If you insert a disc protected with this unit, “Disc Protect ON → OFF” will appear instead of “OFF → ON.”

Recording

EN 35