JVC E9770ED/1VMN, 0905TNH-FN-FN manual Dubbing Mode, Recording from External Equipment, 34 EN

In stop mode, press [SET UP].

Recording

Recording from External Equipment

Video	VR		VCR
DVD-RW	DVD-RW	DVD-R

Before recording from external equipment, see page 17 for connection instructions.

1 Turn the TV and the unit on, and select the input of the TV to which the unit is connected.

2 When you want to record to the disc: Press [DVD].

Press [OPEN/CLOSE/EJECT O] to open the disc tray, then place the disc to record on.

Press [OPEN/CLOSE/EJECT O] again to close the disc tray.

When you want to record to a tape: Press [VCR].

Insert the tape with a record tab into the cassette compartment.

3 Select the input terminal to which the external equipment is connected. (AV1, AV2 or AV3)

To use the input jacks on the back of the unit, select the “AV1” or “AV2” position by pressing [0], [0], [1] or [0], [0], [2] on the remote control or using [PR +/-].

To use the input jacks on the front of this unit, select “AV3” position by pressing [0], [0], [3] on the remote control or using [PR +/-].

4 Select a recording speed using [REC SPEED]. (Refer to “Recording Speed”

on page 23 for DVD or page 64 for VCR.)

5 For disc:

Press [DVD REC I] on the unit to start recording.

For tape:

Press [VCR REC I] on the unit to start recording.

6 Press the PLAY button on the external recording component.

7 For disc:

Press [DVD STOPS] on the unit to stop recording.

For tape:

Press [VCR STOP/EJECT S/O] on the unit to stop recording.

Note

•During recording, if a signal other than PAL is detected (such as NTSC), recording is paused.

Dubbing Mode

Video	VR		VCR
DVD-RW	DVD-RW	DVD-R

You can copy a DVD disc to a videotape or copy a videotape to a DVD disc. This function will be available only if the DVD disc or the tape is not copy protected. Before starting this function, prepare for the recording on the DVD-R / RW disc or the videotape. See pages 23 and 64.

Note for recording to a tape:

•The tape’s record tab is intact.

•The videotape is long enough to record the DVD disc.

Note for recording to a disc:

•The DVD disc is satisfied with the recording status. See pages 23 and 24.

Insert a disc and a tape with a record tab.

1

2 Select “Advanced Setting Menu” using [Cursor U / D], then press [ENTER].

It has already appeared, proceed to step 3.

3 Select “Recording” using

[Cursor U / D], then press [ENTER].

4 Select “Dubbing Mode” using [Cursor U / D / L / P], then press [ENTER].

Option window will appear.

VCR to DVD

5 Select “VCR→DVD” using [Cursor U / D], then press [ENTER].

Dubbing Mode
		VCR	DVD
VCR	DVD
DVD	VCR

6 Press [SET UP] to exit the setting menu.

7 Press [DVD].

Make sure to select a recording speed using [REC SPEED]. (See page 23.)

8 Press [VCR].

34 EN