JVC E9770ED/1VMN, 0905TNH-FN-FN Selecting the Sound Mode, Reformatting a Disc Manually, 26 EN

Reformatting a Disc Manually

Video VR

DVD-RW DVD-RW

If you are using a DVD-RW disc, you can format the disc by performing “Format.” By default it will be in Video mode. You can change this to VR mode using the Setting menu.

Note

•When you reformat the disc, the contents of the disc are erased.

	Insert a recordable disc.
	1	In stop mode, press [SET UP].
		“Easy Setting Menu” or “Advanced Setting Menu”
	2	will appear.
		Select “Disc” using [Cursor U / D],
		then press [ENTER].
Recording	3
		Select “Format” using
	4	[Cursor U / D], then press [ENTER].
		Select “Yes” using [Cursor U / D],
		then press [ENTER].
				Format
			Yes
			No
				Are you sure?
					Yes
					No
		A popup window will appear and prompt you to
		confirm.
	5	If you want to cancel formatting, select “No.”
		Select “Yes” using [Cursor U / D],
		then press [ENTER].
		Formatting will start.
	6	If you want to cancel formatting, select “No.”
		Formatting is complete.
		100% is indicated.

Note

•It is not possible to use a disc formatted in Video mode with this unit on other DVD recorders. If you use the disc on other DVD recorders, reformat the disc using that DVD recorder.

•You cannot cancel formatting once it has started.

Selecting the Sound Mode

This unit can receive bilingual broadcasts.

You can switch between modes by pressing [AUDIO] on the remote control. Each mode is indicated on the TV screen as follows.

• During reception of bilingual broadcasts

Mode	Audio output	Display on the
		TV screen
Main	Main audio from both	Main
	speakers
Sub	Sub audio from both	Sub
	speakers
	• Main audio from the left
Main / Sub	speaker	Main / Sub
	• Sub audio from the
	right speaker

Setting External Input Audio

VideoVR

DVD-RW DVD-RW DVD-R

When the external input audio is a bilingual broadcast, or when copying a video tape to a DVD disc, you can choose “Stereo” or “Bilingual” to record on a DVD.

1 In stop mode, press [SET UP].

2 Select “Advanced Setting Menu” using [Cursor U / D], then press [ENTER].

If it has already appeared, proceed to step 3.

3 Select “Recording” using

[Cursor U / D], then press [ENTER].

4 Select “External input Audio” using [Cursor U / D], then press [ENTER].

Recording		DVD
DVD-RW Recording Format	Video mode
Auto Chapter	10 minutes
Timer Programming
Auto Finalise
Bilingual Recording Audio	Main
External input Audio	Stereo
Dubbing Mode	VCR DVD

26 EN