Playing a DVD or Video CD

Playback Setup

1.Turn on the TV and select the video input source connected to the DVD/VCR Combi receiver.

2.Turn on the audio system (if applicable) and select the input source connected to the DVD/VCR Combi receiver.

3.Press OPEN/CLOSE to open the disc tray and load your chosen disc in the tray, with the play- back side down.

4.Press OPEN/CLOSE to close the tray. Playback starts automatically. If playback does not start, press PLAY.

In some cases, the disc menu might appear instead:

DVD

Use the b B v V buttons to select the title/chapter you want to view, then press ENTER to start. Press TITLE or DISC MENU to return to the menu screen.

VCD

Use the number buttons to select the track you want to view and press RETURN to return to the menu screen. Menu settings and operating proce- dures may differ. Follow the instructions on the each menu screen. You also may set PBC to Off (See “PBC” on page 25).

Notes:

•If parental control is set and the disc is not within the rating settings you must input the password. (See “Lock Menu” on page 26.)

•DVDs may have a region code. Your player does not play discs that have a region code different from your player. The region code for this player is 2 (two).

•To watch a DVD during timer recording standby mode, press POWER and DVD to switch to DVD mode.

General Features

Note:

Unless stated otherwise, all operations described use the remote control. Some features may also be avail- able on the Setup menu.

Moving to another TITLE DVD

When a disc has more than one title, you can move to another title. Press DISPLAY while playback is stopped then the appropriate number (0-9) or use

b/ B to move to another title.

You can play any title by inputting its number while playback is stopped.

Moving to another CHAPTER/TRACK

DVD VCD DivX

When a title on a disc has more than one chapter or a disc has more than one track, you can move to anoth- er chapter/track as follows:

•Press . or > briefly during playback to select the next chapter/track or to return to the beginning of the current chapter/track.

•Press . twice briefly to step back to the previous chapter/track.

•To go directly to any chapter during DVD playback, press DISPLAY and press v / V to select the chapter/track icon. Then, input the chapter/track number or use b / B.

Search DVD VCD DivX

1.Press and hold . or > for about two seconds during playback.

The player will now go into SEARCH mode. .

2.Press and hold . or > repeatedly to select the required speed: mX2, mX4, mX16, mX100 (backward) or MX2, MX4, MX16, MX100 (forward).

With a Video CD, the Search speed changes: mX2, mX4, mX8 (backward) or MX2, MX4, MX8 (forward).

3.To exit SEARCH mode, press PLAY.

Changing the Audio Channel VCD

Press AUDIO repeatedly during playback to hear a dif- ferent audio channel (Stereo, Left, or Right).