LG Electronics LH-CX245 owner manual Record Pause Mode, Moisture Condensation

	Symptom	Cause		Correction
	This remote control	The remote control is not pointed at the		Point the remote control at the remote
	uses the same	remote sensor of the DVD/VCR Combi receiver.		sensor of the DVD/VCR Combi receiver.
	buttons for VCR and
		The remote control is too far from the		Operate the remote control within 23 ft
	DVD functions
		DVD/VCR Combi receiver.		(7 m).
	(ex. PLAY).
		There is an obstacle in the path of the remote		Remove the obstacle.
		control and the DVD/VCR Combi receiver.
		The batteries in the remote control are		Replace the batteries with new ones.
		exhausted.
		This remote control uses the same		When using a VCR, first press the VCR
		buttons for VCR and DVD functions		button. When using a DVD, first press
		(ex. PLAY).		the CD/DVD button.
The tape does not run		The DVD/VCR Combi receiver is in the		Press PAUSE/STEP (X) to resume
during recording.		RECORD PAUSE MODE.		recording.
The tape will not rewind		The tape is already fully rewound or fast-		Check the tape.
or fast-forward.		forwarded.
The playback picture		If you’re using only the RF cable for con-		Set the TV to the Video channel
does not appear while		nection.		(see p. 17).
the tape is running.
Noise appears during		This is normal.		Turn camcorder on and operate
visual search.				properly.
Noise appears during		The automatic tracking mode is engaged.		Try manual tracking (see p. 27).
normal playback.		The automatic tracking mode is engaged.
Breaks are noticeable		There is no tape loaded, or the tape loaded		Try manual tracking (see p. 27).
in Hi-Fi soundtrack.		has had its record safety tab removed.
Recording cannot be		The source (another VCR, camcorder) has		Insert a tape, or using adhesive tape,
started.		not been properly connected.		cover the hole where the tab was
				removed.
Tape-to-tape editing is		The clock/or the timer have been set		Confirm that the camcorder is properly
not possible.		incorrectly.		connected.
Timer recording won’t		The timer is not engaged.		Re-perform the clock and/or timer set-
work.				tings.
				Press POWER and confirm that the
		The loaded tape has had its record safety		timer indicator is displayed on the
				DVD/VCR Combi receiver’s Display.
		tab removed.
				Insert a pate with adhesive tape, or
		Audio mode is not set properly.		insert a tape with the record safety tab
				intact.
No Hi-Fi sound.				Select “STEREO” by repeatedly press-
				ing AUDIO on the remote control.
		Moisture Condensation
Moisture condensation can occur:			In locations where moisture condensation may occur:
•	When the DVD/VCR Combi receiver is moved from		• Keep the DVD/VCR Combi receiver plugged into an AC
	a cold place to a warm place.		power outlet with POWER On. This will help prevent conden-
•	Under extremely humid conditions.		sation.
			• When condensation has occurred, wait a few hours
			for the DVD/VCR Combi receiver to dry before using
			it.

50