Additional Features-VCR part
On Screen Display
You may easily display the current time or tape counter, amount of tape left, day, month, year, day of week, programme channel, tape speed and opera- tional mode of your DVD/VCR Combi receiver will appear on the TV screen. If a recording is taking
Video Doctor (Self-Diagnosis)
This feature informs you that there is a problem with your DVD/VCR Combi receiver. These error mes- sages will appear on the TV screen.
place these On Screen Displays will not be recorded onto the tape.
1. | Press CLK/CNT to display. |
| Press CLK/CNT repeatedly to cycle through the |
| display options. The tape counter and amount of |
| tape left will appear if there is a tape loaded. |
2. | After 3 seconds the majority of the On Screen |
| Displays will clear leaving only the clock or tape |
1.Press i.
Press 1 or 2 to select Dr. Press OK.
|
|
| 1 2 |
| VCR | VCR | |
REC | PSET | TIME | SYS- | Dr. | Dr. | ||
ACMS | |||||||
R | DATE | TEM |
fOSD 
NIC 
ON | 16:9 |
|
|
|
| OK | i |
OFF | 4:3 OPR |
| |||||
VCR |
|
Dr. | VIDEO DOCTOR |
HEAD STATUS
TAPE STATUS
NO. OF TIMER PROGRAMME NEXT TIMER PROGRAMME
OK
i
counter and the amount of tape left on the screen. |
Press CLK/CNT again to remove all displays from |
the TV screen. |
Tape Counter Memory Stop
The Digital Tape Counter can be displayed on the display window instead of the time by pressing CLK/CNT on the remote control. The Digital Tape Counter indicates the relative positions of recordings on the tape.
1.Press CLK/CNT.
Press CLEAR to set the counter to 0:00:00. Press PLAY or start recording.
The tape counter will display the actual play time in hours, minutes and seconds.
2.Press STOP when playback or recording is complete.
Press BACKWARD.
The tape will rewind and automatically stop when the counter returns to 0:00:00.
2.Press 3 or 4 to check a problem.
HEAD STATUS
O PLEASE CLEAN: Clean your video heads.
TAPE STATUS
ONOT RECORDABLE:
Insert a tape with its protection tab in place
NO. OF TIMER PROGRAMME
O2
Shows the number of timer recording.
NEXT TIMER PROGRAMME
O
Shows the current status of timer recording.
3.Press i
42