LG Electronics LH-CX245 owner manual Speaker Setup, Size

5.1 Speaker Setup

This chapter includes important reference information to help you set your DVD/VCR Combi receiver.

Speaker Setup

Make the following settings for the built-in 5.1 channel surround decoder.

1.Press SETUP. The setup menu appears.

2.Use v / V to select the AUDIO option then press B to move to the second level.

3.Use v / V to select the Speaker Setup option then press B to move to the third level. “Select” is high- lighted.

4.Press ENTER and 5.1 Speaker Setup menu appears.

AUDIO

Speaker	Front L
Size
	Large
Volume		dB
	0
Distance		m(ft)
	0.6(2)
Test
	Off
	Select	Move	Return	Enter

5.Use b / B to select the desired speaker.

6.Adjust options using v / V / b / B buttons.

7.Press RETURN to return to the menu screen.

Speaker selection

Select a speaker that you want to adjust. (Front speakers (Left), Center Speaker, Front speakers (Right), Rear speakers (Right), Rear speakers (Left), or SubWoofer)

Note:

Certain speaker settings are prohibited by the Dolby Digital licensing agreement.

Size

Since the speaker settings are fixed, you cannot change the settings.

Volume

Press b / B to adjust the output level of the selected speaker. (-6dB ~ 6dB)

Distance

If you connected speakers to your DVD/VCR Combi receiver, setting the Distance lets the speakers know how far the sound has to travel to reach your set lis- tening point. This allows the sound from each speaker to reach the listener at the same time.

Press b / B to adjust the Distance of the selected speaker.

[0.3(1)m(ft) - 6.0(20)m(ft)]

Test

Press b / B to test the signals of each speaker. Adjust the volume to match the volume of test signals memo- rized in the system.

Front Left (L) → Center → Front Right (R)

→ Rear Left (R) → Rear Right (L) → SubWoofer

Operation

39