Check the following guide for the possible cause of a problem before contacting service.
Symptom | Cause | Correction |
|
| ||||
|
|
|
|
|
|
|
|
|
No power. | The power cord is disconnected. | Plug the power cord into the wall outlet |
| |||||
|
| securely. |
| |||||
|
|
|
|
|
|
|
|
|
The power is on, but | No disc is inserted. | Insert a disc or tape. (Check that the |
| |||||
the DVD/VCR Combi | No tape is inserted. | disc or tape indicator in the display |
| |||||
receiver does not work. |
| window is lit.) |
| |||||
|
|
|
|
|
|
|
|
|
No picture. | The TV is not set to receive DVD/VCR | Select the appropriate video input mode |
| |||||
| Combi receiver signal output. | on the TV so the picture from the |
| |||||
|
| DVD/VCR Combi receiver appears on |
| |||||
|
| the TV screen. |
| |||||
|
|
|
|
|
|
|
| |
| TV/VCR mode for DVD/VCR Combi | Press the TV/VCR button on the remote |
| |||||
| receiver is set to TV. | control repeatedly to choose VCR mode. |
| |||||
|
| TV indicator disappears in the display |
| |||||
|
| window. |
| |||||
|
|
|
|
|
|
|
| |
| The video cable is not connected | Connect the video cable securely. |
| |||||
| securely. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| The connected TV power is turned off. | Turn on the TV. |
| |||||
|
|
|
|
|
|
| ||
No sound. | The equipment connected with the audio | Select the correct input mode on the audio |
| |||||
cable is not set to receive DVD/VCR | receiver so you can listen to the sound from |
| ||||||
|
| |||||||
| Combi receiver signal output. | the DVD/VCR Combi receiver. |
| |||||
|
|
|
|
|
|
| ||
| The audio cables are not connected | Connect the audio cables securely. |
| |||||
|
| |||||||
| securely. |
|
|
|
|
|
|
|
| The power of the equipment connected | Turn on the equipment connected with |
| |||||
| with the audio cables is turned off. | the audio cables. |
|
| ||||
| The digital audio output is set to the | Set the digital audio output to the |
| |||||
| wrong position. | correct position, then turn on the | Reference | |||||
|
| DVD/VCR Combi receiver again by | ||||||
|
|
| ||||||
|
| pressing POWER. |
| |||||
|
|
|
|
|
|
| ||
The playback picture is | The disc is dirty. | Clean the disc. |
|
| ||||
poor. | Tape heads are dirty. | Clean video heads. |
| |||||
|
| |||||||
|
|
|
|
|
|
| ||
| Tape is a rental or was recorded on | Use (v/V) for manual tracking |
| |||||
| another DVD/VCR Combi receiver. | adjustment while tape is playing. |
| |||||
|
|
|
|
|
|
| ||
The DVD/VCR Combi | No disc is inserted. | Insert a disc or tape. (Check that the |
| |||||
No tape is inserted. | disc or tape indicator in the display |
| ||||||
receiver does not start |
| |||||||
| window is lit.) |
| ||||||
playback. |
|
| ||||||
|
|
|
|
|
|
|
| |
An unplayable disc is inserted. | Insert a playable disc. (Check the disc |
| ||||||
|
| |||||||
|
| type, color system, and Regional code.) |
| |||||
|
|
|
|
|
| |||
| The disc is placed upside down. | Place the disc with the playback side down. |
| |||||
|
|
|
|
|
|
| ||
| The disc is not placed within the guide. | Place the disc on the disc tray correctly |
| |||||
|
| inside the guide. |
| |||||
|
|
|
|
| ||||
| The disc is dirty. | Clean the disc. |
|
| ||||
| The Rating level is set. | Cancel the Rating function or change the |
| |||||
|
| rating level. |
| |||||
|
|
|
|
|
|
|
|
|
Video Head Cleaning
Whenever a video cassette is inserted into or ejected from your DVD/VCR Combi receiver the video head is auto- matically cleaned. This should mean that additional head cleaning should not be necessary.
However dirt accumulating on the head after a long period of time can cause the playback picture to become blurred or broken up. High quality video cassette tapes will not normally deposit dirt onto the video head, but old or damaged tapes might.
49