ShowView Programming
ShowView greatly simplifies entering the date, channel, start and end times of a Timer Recording by simply entering a ShowView Code. ShowView Codes are published in most TV guide magazines; they can vary one to nine numbers in length.
SHOWVIEW is a registered trademark of Gemstar Development Corporation.
The SHOWVIEW system is manufactured under licence from Gemstar Development Corporation.
1.Make sure that TV channels have been tuned and stored in correct SHOWVIEW order. Insert a video cassette with protection tab into your DVD/VCR Combi receiver.
SHOWVIEW NO.
- - - - - - - - -
ONCE
REC | 0~9, | OK i |
2.Press SHOWVIEW.
3.Press D or E to select the recording type. ONCE: To record once.
WEEKLY: To record at the same time every week.
DAILY: To record every day (except Saturday and Sunday) at the same time.
4.Press the numbered buttons to enter the ShowView Code of the TV programme that you wish to record.
If you make a mistake press F then enter the revised number.
SHOWVIEW NO. 246876543
| ONCE |
|
REC | 0~9, | OK i |
5.Press OK.
If PLEASE CHECK is displayed it means that you have entered the wrong ShowView number, entered the ShowView number incorrectly.
If “-
PR | DATE |
|
| TIME |
|
|
12 | 10 | : 11~11 :55 | SP | |||
- - | - - | - - | : | - - ~ - - | : - - | SP |
- - | - - | - - | : | - - ~ - - | : - - | SP |
- - | - - | - - | : | - - ~ - - | : - - | SP |
- - | - - | - - | : | - - ~ - - | : - - | SP |
- - | - - | - - | : | - - ~ - - | : - - | SP |
- - | - - | - - | : | - - ~ - - | : - - | SP |
i
6.Press F or G to select the settings that you wish to revise. (PR, DATE, TIME, VPS and SP).
Press D or E to enter the correct information.
PR | DATE |
|
| TIME |
|
|
|
12 | 10 | : 11~11 : | 55 | SP | |||
- - | - - | - - | : | - - ~ - - | : - - | SP | |
- - | - - | - - | : | - - ~ - - | : - - | SP | |
- - | - - | - - | : | - - ~ - - | : - - | SP | |
- - | - - | - - | : | - - ~ - - | : - - | SP | |
- - | - - | - - | : | - - ~ - - | : - - | SP | |
- - | - - | - - | : | - - ~ - - | : - - | SP | |
i
7.Press D or E to switch VPS/PDC on or off. Press G to select the recording speed.
Press D or E to select the desired tape speed (SP, IP, or LP).
IP mode determines how much tape is left and switches speed from SP to LP, if necessary, to complete recording the program. IP mode is not selected when VPS/PDC is ON. Check that the timer event details are correct. If you wish to record from AUDIO IN and VIDEO IN on the front or from either of the EURO SCART sockets on the back of DVD/VCR Combi receiver, press AV to select for correct display (AV1, AV2 or AV3).
PR | DATE |
|
| TIME |
|
|
12 | 10 | : 11~11 :55 |
| |||
SP | ||||||
- - | - - | - - | : | - - - | - | SP |
- - | - - | - - | : | - - ~ - - | : - - | SP |
- - | - - | - - | : | - - ~ - - | : - - | SP |
- - | - - | - - | : | - - ~ - - | : - - | SP |
- - | - - | - - | : | - - ~ - - | : - - | SP |
- - | - - | - - | : | - - ~ - - | : - - | SP |
i
8.If you want to make another ShowView recording repeat stages 2 - 7. Press i twice.
If PLEASE CHECK is displayed, you have entered incorrect information and will need to
Press POWER to switch your DVD/VCR Combi
receiver power off mode. 
will appear in the video recorder’s display while your DVD/VCR Combi receiver waits to make the recording.
To watch a DVD during timer recording standby mode, press POWER and DVD to switch to DVD mode.
9.Press STOP to end recording.
Notes
•Video Programme System (VPS)
The Video Programme System (VPS) ensures that the TV programmes that you have programmed for timer recording will be recorded exactly from their beginning to end, even if the actual broadcasting time differs from the scheduled time due to delayed start, or if the programme is extended beyond its scheduled time. Also, if a programme is interrupted, for example, if a news flash is inserted, the record- ing will also be interrupted automatically and resumed when the programme continues.
The VPS signal is broadcast by the TV station and this controls the timer in the video recorder.
VPS should be set ON for all timer recordings from TV stations broadcasting these signals. It should be set OFF for all timer recordings from TV stations that are not broadcasting these signals.
Operation
29